1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
24 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
25 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
27 for am__flg in $$MAKEFLAGS; do \
30 *n*) am__dry=yes; break;; \
34 test $$am__dry = yes; \
36 pkgdatadir = $(datadir)/@PACKAGE@
37 pkgincludedir = $(includedir)/@PACKAGE@
38 pkglibdir = $(libdir)/@PACKAGE@
39 pkglibexecdir = $(libexecdir)/@PACKAGE@
40 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
41 install_sh_DATA = $(install_sh) -c -m 644
42 install_sh_PROGRAM = $(install_sh) -c
43 install_sh_SCRIPT = $(install_sh) -c
44 INSTALL_HEADER = $(INSTALL_DATA)
45 transform = $(program_transform_name)
52 build_triplet = @build@
55 DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
56 $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
57 $(srcdir)/config.h.in $(top_srcdir)/configure ABOUT-NLS \
58 AUTHORS COPYING ChangeLog INSTALL NEWS ar-lib compile \
59 config.guess config.rpath config.sub depcomp install-sh \
61 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
62 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
63 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
65 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
66 configure.lineno config.status.lineno
67 mkinstalldirs = $(install_sh) -d
68 CONFIG_HEADER = config.h
70 CONFIG_CLEAN_VPATH_FILES =
73 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
74 html-recursive info-recursive install-data-recursive \
75 install-dvi-recursive install-exec-recursive \
76 install-html-recursive install-info-recursive \
77 install-pdf-recursive install-ps-recursive install-recursive \
78 installcheck-recursive installdirs-recursive pdf-recursive \
79 ps-recursive uninstall-recursive
80 am__can_run_installinfo = \
81 case $$AM_UPDATE_INFO_DIR in \
83 *) (install-info --version) >/dev/null 2>&1;; \
85 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
86 am__vpath_adj = case $$p in \
87 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
90 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
92 am__nobase_strip_setup = \
93 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
95 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
96 am__nobase_list = $(am__nobase_strip_setup); \
97 for p in $$list; do echo "$$p $$p"; done | \
98 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
99 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
100 if (++n[$$2] == $(am__install_max)) \
101 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
102 END { for (dir in files) print dir, files[dir] }'
104 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
105 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
106 am__uninstall_files_from_dir = { \
108 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
109 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
110 $(am__cd) "$$dir" && rm -f $$files; }; \
112 am__installdirs = "$(DESTDIR)$(autostartdir)" \
113 "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"
114 DATA = $(autostart_DATA) $(desktop_DATA) $(dist_doc_DATA)
115 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
116 distclean-recursive maintainer-clean-recursive
117 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
118 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
119 distdir dist dist-all distcheck
122 DIST_SUBDIRS = $(SUBDIRS)
123 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
124 distdir = $(PACKAGE)-$(VERSION)
125 top_distdir = $(distdir)
126 am__remove_distdir = \
127 if test -d "$(distdir)"; then \
128 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
129 && rm -rf "$(distdir)" \
130 || { sleep 5 && rm -rf "$(distdir)"; }; \
134 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
135 sed_rest='s,^[^/]*/*,,'; \
136 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
137 sed_butlast='s,/*[^/]*$$,,'; \
138 while test -n "$$dir1"; do \
139 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
140 if test "$$first" != "."; then \
141 if test "$$first" = ".."; then \
142 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
143 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
145 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
146 if test "$$first2" = "$$first"; then \
147 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
151 dir0="$$dir0"/"$$first"; \
154 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
157 DIST_ARCHIVES = $(distdir).tar.gz
159 distuninstallcheck_listfiles = find . -type f -print
160 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
161 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
162 distcleancheck_listfiles = find . -type f -print
165 APPINDICATOR_CFLAGS = @APPINDICATOR_CFLAGS@
166 APPINDICATOR_LIBS = @APPINDICATOR_LIBS@
168 ATASMART_CFLAGS = @ATASMART_CFLAGS@
169 ATASMART_LIBS = @ATASMART_LIBS@
170 AUTOCONF = @AUTOCONF@
171 AUTOHEADER = @AUTOHEADER@
172 AUTOMAKE = @AUTOMAKE@
175 CCDEPMODE = @CCDEPMODE@
178 CPPFLAGS = @CPPFLAGS@
179 CURL_CFLAGS = @CURL_CFLAGS@
180 CURL_LIBS = @CURL_LIBS@
181 CYGPATH_W = @CYGPATH_W@
189 GCONFTOOL = @GCONFTOOL@
190 GCONF_CFLAGS = @GCONF_CFLAGS@
191 GCONF_LIBS = @GCONF_LIBS@
192 GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
193 GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
194 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
196 GMSGFMT_015 = @GMSGFMT_015@
198 GTK_CFLAGS = @GTK_CFLAGS@
199 GTK_LIBS = @GTK_LIBS@
200 GTOP_CFLAGS = @GTOP_CFLAGS@
201 GTOP_LIBS = @GTOP_LIBS@
202 HAVE_CPPCHECK = @HAVE_CPPCHECK@
203 HELP2MAN = @HELP2MAN@
205 INSTALL_DATA = @INSTALL_DATA@
206 INSTALL_PROGRAM = @INSTALL_PROGRAM@
207 INSTALL_SCRIPT = @INSTALL_SCRIPT@
208 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
209 INTLLIBS = @INTLLIBS@
210 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
211 JSON_CFLAGS = @JSON_CFLAGS@
212 JSON_LIBS = @JSON_LIBS@
214 LIBATIADL_CFLAGS = @LIBATIADL_CFLAGS@
215 LIBATIADL_LIBS = @LIBATIADL_LIBS@
216 LIBICONV = @LIBICONV@
218 LIBMICROHTTPD_CFLAGS = @LIBMICROHTTPD_CFLAGS@
219 LIBMICROHTTPD_LIBS = @LIBMICROHTTPD_LIBS@
220 LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@
221 LIBNOTIFY_LIBS = @LIBNOTIFY_LIBS@
224 LTLIBICONV = @LTLIBICONV@
225 LTLIBINTL = @LTLIBINTL@
226 LTLIBOBJS = @LTLIBOBJS@
227 MAKEINFO = @MAKEINFO@
230 MSGFMT_015 = @MSGFMT_015@
231 MSGMERGE = @MSGMERGE@
232 NVIDIA_CFLAGS = @NVIDIA_CFLAGS@
233 NVIDIA_LIBS = @NVIDIA_LIBS@
236 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
237 PACKAGE_NAME = @PACKAGE_NAME@
238 PACKAGE_STRING = @PACKAGE_STRING@
239 PACKAGE_TARNAME = @PACKAGE_TARNAME@
240 PACKAGE_URL = @PACKAGE_URL@
241 PACKAGE_VERSION = @PACKAGE_VERSION@
242 PATH_SEPARATOR = @PATH_SEPARATOR@
243 PKG_CONFIG = @PKG_CONFIG@
244 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
245 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
247 PTHREAD_LIBS = @PTHREAD_LIBS@
249 SENSORS_LIBS = @SENSORS_LIBS@
250 SET_MAKE = @SET_MAKE@
253 UNITY_CFLAGS = @UNITY_CFLAGS@
254 UNITY_LIBS = @UNITY_LIBS@
257 X11_CFLAGS = @X11_CFLAGS@
258 X11_LIBS = @X11_LIBS@
259 XEXT_CFLAGS = @XEXT_CFLAGS@
260 XEXT_LIBS = @XEXT_LIBS@
261 XGETTEXT = @XGETTEXT@
262 XGETTEXT_015 = @XGETTEXT_015@
263 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
265 abs_builddir = @abs_builddir@
266 abs_srcdir = @abs_srcdir@
267 abs_top_builddir = @abs_top_builddir@
268 abs_top_srcdir = @abs_top_srcdir@
269 ac_ct_AR = @ac_ct_AR@
270 ac_ct_CC = @ac_ct_CC@
271 am__include = @am__include@
272 am__leading_dot = @am__leading_dot@
273 am__quote = @am__quote@
275 am__untar = @am__untar@
278 build_alias = @build_alias@
279 build_cpu = @build_cpu@
280 build_os = @build_os@
281 build_vendor = @build_vendor@
282 builddir = @builddir@
284 datarootdir = @datarootdir@
287 exec_prefix = @exec_prefix@
289 host_alias = @host_alias@
290 host_cpu = @host_cpu@
292 host_vendor = @host_vendor@
294 includedir = @includedir@
296 install_sh = @install_sh@
298 libexecdir = @libexecdir@
299 localedir = @localedir@
300 localstatedir = @localstatedir@
303 oldincludedir = @oldincludedir@
306 program_transform_name = @program_transform_name@
309 sharedstatedir = @sharedstatedir@
311 sysconfdir = @sysconfdir@
312 target_alias = @target_alias@
313 top_build_prefix = @top_build_prefix@
314 top_builddir = @top_builddir@
315 top_srcdir = @top_srcdir@
319 icons/hicolor/scalable \
320 icons/hicolor/14x14 \
321 icons/hicolor/16x16 \
322 icons/hicolor/22x22 \
323 icons/hicolor/24x24 \
324 icons/hicolor/32x32 \
325 icons/hicolor/48x48 \
326 icons/hicolor/64x64 \
327 icons/ubuntu-mono-dark/status/22 \
328 icons/ubuntu-mono-light/status/22 \
329 icons/ubuntu-mono-dark/apps/22 \
333 dist_doc_DATA = AUTHORS \
340 autostartdir = $(sysconfdir)/xdg/autostart
341 autostart_DATA = psensor.desktop
342 desktopdir = $(datadir)/applications
343 desktop_DATA = psensor.desktop
344 EXTRA_DIST = $(desktop_DATA) $(autostart_DATA)
346 $(MAKE) $(AM_MAKEFLAGS) all-recursive
349 am--refresh: Makefile
351 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
353 case '$(am__configure_deps)' in \
355 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
356 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
361 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
362 $(am__cd) $(top_srcdir) && \
363 $(AUTOMAKE) --gnu Makefile
365 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
368 echo ' $(SHELL) ./config.status'; \
369 $(SHELL) ./config.status;; \
371 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
372 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
375 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
376 $(SHELL) ./config.status --recheck
378 $(top_srcdir)/configure: $(am__configure_deps)
379 $(am__cd) $(srcdir) && $(AUTOCONF)
380 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
381 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
382 $(am__aclocal_m4_deps):
385 @if test ! -f $@; then rm -f stamp-h1; else :; fi
386 @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
388 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
390 cd $(top_builddir) && $(SHELL) ./config.status config.h
391 $(srcdir)/config.h.in: $(am__configure_deps)
392 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
397 -rm -f config.h stamp-h1
398 install-autostartDATA: $(autostart_DATA)
400 @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
401 if test -n "$$list"; then \
402 echo " $(MKDIR_P) '$(DESTDIR)$(autostartdir)'"; \
403 $(MKDIR_P) "$(DESTDIR)$(autostartdir)" || exit 1; \
405 for p in $$list; do \
406 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
408 done | $(am__base_list) | \
409 while read files; do \
410 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autostartdir)'"; \
411 $(INSTALL_DATA) $$files "$(DESTDIR)$(autostartdir)" || exit $$?; \
414 uninstall-autostartDATA:
416 @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
417 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
418 dir='$(DESTDIR)$(autostartdir)'; $(am__uninstall_files_from_dir)
419 install-desktopDATA: $(desktop_DATA)
421 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
422 if test -n "$$list"; then \
423 echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \
424 $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \
426 for p in $$list; do \
427 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
429 done | $(am__base_list) | \
430 while read files; do \
431 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \
432 $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \
435 uninstall-desktopDATA:
437 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
438 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
439 dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
440 install-dist_docDATA: $(dist_doc_DATA)
442 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
443 if test -n "$$list"; then \
444 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
445 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
447 for p in $$list; do \
448 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
450 done | $(am__base_list) | \
451 while read files; do \
452 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
453 $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
456 uninstall-dist_docDATA:
458 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
459 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
460 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
462 # This directory's subdirectories are mostly independent; you can cd
463 # into them and run `make' without going through this Makefile.
464 # To change the values of `make' variables: instead of editing Makefiles,
465 # (1) if the variable is set in `config.status', edit `config.status'
466 # (which will cause the Makefiles to be regenerated when you run `make');
467 # (2) otherwise, pass the desired values on the `make' command line.
468 $(RECURSIVE_TARGETS):
469 @fail= failcom='exit 1'; \
470 for f in x $$MAKEFLAGS; do \
473 *k*) failcom='fail=yes';; \
477 target=`echo $@ | sed s/-recursive//`; \
478 list='$(SUBDIRS)'; for subdir in $$list; do \
479 echo "Making $$target in $$subdir"; \
480 if test "$$subdir" = "."; then \
482 local_target="$$target-am"; \
484 local_target="$$target"; \
486 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
489 if test "$$dot_seen" = "no"; then \
490 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
493 $(RECURSIVE_CLEAN_TARGETS):
494 @fail= failcom='exit 1'; \
495 for f in x $$MAKEFLAGS; do \
498 *k*) failcom='fail=yes';; \
503 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
504 *) list='$(SUBDIRS)' ;; \
506 rev=''; for subdir in $$list; do \
507 if test "$$subdir" = "."; then :; else \
508 rev="$$subdir $$rev"; \
512 target=`echo $@ | sed s/-recursive//`; \
513 for subdir in $$rev; do \
514 echo "Making $$target in $$subdir"; \
515 if test "$$subdir" = "."; then \
516 local_target="$$target-am"; \
518 local_target="$$target"; \
520 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
522 done && test -z "$$fail"
524 list='$(SUBDIRS)'; for subdir in $$list; do \
525 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
528 list='$(SUBDIRS)'; for subdir in $$list; do \
529 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
532 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
533 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
534 unique=`for i in $$list; do \
535 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
537 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
538 END { if (nonempty) { for (i in files) print i; }; }'`; \
542 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
543 $(TAGS_FILES) $(LISP)
546 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
547 include_option=--etags-include; \
550 include_option=--include; \
553 list='$(SUBDIRS)'; for subdir in $$list; do \
554 if test "$$subdir" = .; then :; else \
555 test ! -f $$subdir/TAGS || \
556 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
559 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
560 unique=`for i in $$list; do \
561 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
563 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
564 END { if (nonempty) { for (i in files) print i; }; }'`; \
566 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
567 test -n "$$unique" || unique=$$empty_fix; \
568 if test $$# -gt 0; then \
569 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
572 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
577 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
578 $(TAGS_FILES) $(LISP)
579 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
580 unique=`for i in $$list; do \
581 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
583 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
584 END { if (nonempty) { for (i in files) print i; }; }'`; \
585 test -z "$(CTAGS_ARGS)$$unique" \
586 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
590 here=`$(am__cd) $(top_builddir) && pwd` \
591 && $(am__cd) $(top_srcdir) \
592 && gtags -i $(GTAGS_ARGS) "$$here"
595 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
597 distdir: $(DISTFILES)
598 $(am__remove_distdir)
599 test -d "$(distdir)" || mkdir "$(distdir)"
600 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
601 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
602 list='$(DISTFILES)'; \
603 dist_files=`for file in $$list; do echo $$file; done | \
604 sed -e "s|^$$srcdirstrip/||;t" \
605 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
606 case $$dist_files in \
607 */*) $(MKDIR_P) `echo "$$dist_files" | \
608 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
611 for file in $$dist_files; do \
612 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
613 if test -d $$d/$$file; then \
614 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
615 if test -d "$(distdir)/$$file"; then \
616 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
618 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
619 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
620 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
622 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
624 test -f "$(distdir)/$$file" \
625 || cp -p $$d/$$file "$(distdir)/$$file" \
629 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
630 if test "$$subdir" = .; then :; else \
632 || test -d "$(distdir)/$$subdir" \
633 || $(MKDIR_P) "$(distdir)/$$subdir" \
635 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
637 new_distdir=$$reldir; \
638 dir1=$$subdir; dir2="$(top_distdir)"; \
640 new_top_distdir=$$reldir; \
641 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
642 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
643 ($(am__cd) $$subdir && \
644 $(MAKE) $(AM_MAKEFLAGS) \
645 top_distdir="$$new_top_distdir" \
646 distdir="$$new_distdir" \
647 am__remove_distdir=: \
648 am__skip_length_check=: \
649 am__skip_mode_fix=: \
654 -test -n "$(am__skip_mode_fix)" \
655 || find "$(distdir)" -type d ! -perm -755 \
656 -exec chmod u+rwx,go+rx {} \; -o \
657 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
658 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
659 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
660 || chmod -R a+r "$(distdir)"
662 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
663 $(am__remove_distdir)
666 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
667 $(am__remove_distdir)
670 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
671 $(am__remove_distdir)
674 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
675 $(am__remove_distdir)
678 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
679 $(am__remove_distdir)
682 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
683 $(am__remove_distdir)
686 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
687 $(am__remove_distdir)
690 -rm -f $(distdir).zip
691 zip -rq $(distdir).zip $(distdir)
692 $(am__remove_distdir)
694 dist dist-all: distdir
695 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
696 $(am__remove_distdir)
698 # This target untars the dist file and tries a VPATH configuration. Then
699 # it guarantees that the distribution is self-contained by making another
702 case '$(DIST_ARCHIVES)' in \
704 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
706 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
708 lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
710 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
712 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
714 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
716 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
718 unzip $(distdir).zip ;;\
720 chmod -R a-w $(distdir); chmod u+w $(distdir)
721 mkdir $(distdir)/_build
722 mkdir $(distdir)/_inst
724 test -d $(distdir)/_build || exit 0; \
725 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
726 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
728 && $(am__cd) $(distdir)/_build \
729 && ../configure --srcdir=.. --prefix="$$dc_install_base" \
730 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
731 $(DISTCHECK_CONFIGURE_FLAGS) \
732 && $(MAKE) $(AM_MAKEFLAGS) \
733 && $(MAKE) $(AM_MAKEFLAGS) dvi \
734 && $(MAKE) $(AM_MAKEFLAGS) check \
735 && $(MAKE) $(AM_MAKEFLAGS) install \
736 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
737 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
738 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
740 && chmod -R a-w "$$dc_install_base" \
742 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
743 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
744 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
745 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
746 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
747 } || { rm -rf "$$dc_destdir"; exit 1; }) \
748 && rm -rf "$$dc_destdir" \
749 && $(MAKE) $(AM_MAKEFLAGS) dist \
750 && rm -rf $(DIST_ARCHIVES) \
751 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
754 $(am__remove_distdir)
755 @(echo "$(distdir) archives ready for distribution: "; \
756 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
757 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
759 @test -n '$(distuninstallcheck_dir)' || { \
760 echo 'ERROR: trying to run $@ with an empty' \
761 '$$(distuninstallcheck_dir)' >&2; \
764 $(am__cd) '$(distuninstallcheck_dir)' || { \
765 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
768 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
769 || { echo "ERROR: files left after uninstall:" ; \
770 if test -n "$(DESTDIR)"; then \
771 echo " (check DESTDIR support)"; \
773 $(distuninstallcheck_listfiles) ; \
775 distcleancheck: distclean
776 @if test '$(srcdir)' = . ; then \
777 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
780 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
781 || { echo "ERROR: files left in build directory after distclean:" ; \
782 $(distcleancheck_listfiles) ; \
785 check: check-recursive
786 all-am: Makefile $(DATA) config.h
787 installdirs: installdirs-recursive
789 for dir in "$(DESTDIR)$(autostartdir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"; do \
790 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
792 install: install-recursive
793 install-exec: install-exec-recursive
794 install-data: install-data-recursive
795 uninstall: uninstall-recursive
798 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
800 installcheck: installcheck-recursive
802 if test -z '$(STRIP)'; then \
803 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
804 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
807 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
808 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
809 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
816 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
817 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
819 maintainer-clean-generic:
820 @echo "This command is intended for maintainers to use"
821 @echo "it deletes files that may require special tools to rebuild."
822 clean: clean-recursive
824 clean-am: clean-generic mostlyclean-am
826 distclean: distclean-recursive
827 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
829 distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
843 install-data-am: install-autostartDATA install-desktopDATA \
846 install-dvi: install-dvi-recursive
852 install-html: install-html-recursive
856 install-info: install-info-recursive
862 install-pdf: install-pdf-recursive
866 install-ps: install-ps-recursive
872 maintainer-clean: maintainer-clean-recursive
873 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
874 -rm -rf $(top_srcdir)/autom4te.cache
876 maintainer-clean-am: distclean-am maintainer-clean-generic
878 mostlyclean: mostlyclean-recursive
880 mostlyclean-am: mostlyclean-generic
890 uninstall-am: uninstall-autostartDATA uninstall-desktopDATA \
891 uninstall-dist_docDATA
893 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
894 ctags-recursive install-am install-strip tags-recursive
896 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
897 all all-am am--refresh check check-am clean clean-generic \
898 ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
899 dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
900 distcheck distclean distclean-generic distclean-hdr \
901 distclean-tags distcleancheck distdir distuninstallcheck dvi \
902 dvi-am html html-am info info-am install install-am \
903 install-autostartDATA install-data install-data-am \
904 install-desktopDATA install-dist_docDATA install-dvi \
905 install-dvi-am install-exec install-exec-am install-html \
906 install-html-am install-info install-info-am install-man \
907 install-pdf install-pdf-am install-ps install-ps-am \
908 install-strip installcheck installcheck-am installdirs \
909 installdirs-am maintainer-clean maintainer-clean-generic \
910 mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
911 tags-recursive uninstall uninstall-am uninstall-autostartDATA \
912 uninstall-desktopDATA uninstall-dist_docDATA
915 README.html: README www/style.css
916 asciidoc --theme style -a themedir=`pwd`/www -n -a toc README
918 # Tell versions [3.59,3.63) of GNU make to not export all variables.
919 # Otherwise a system limit (for SysV at least) may be exceeded.