-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
build_triplet = @build@
host_triplet = @host@
subdir = .
-DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/config.h.in $(top_srcdir)/configure ABOUT-NLS \
- AUTHORS COPYING ChangeLog INSTALL NEWS compile config.guess \
- config.rpath config.sub depcomp install-sh missing
+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
+ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/config.h.in ABOUT-NLS $(dist_doc_DATA) COPYING \
+ compile config.guess config.rpath config.sub depcomp \
+ install-sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
DATA = $(desktop_DATA) $(dist_doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod u+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
uninstall-am: uninstall-desktopDATA uninstall-dist_docDATA
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
- ctags-recursive install-am install-strip tags-recursive
+.MAKE: $(am__recursive_targets) all install-am install-strip
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-generic distclean-hdr \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ pdf-am ps ps-am tags tags-am uninstall uninstall-am \
uninstall-desktopDATA uninstall-dist_docDATA
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
build_triplet = @build@
host_triplet = @host@
subdir = icons/hicolor/scalable
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
}
am__installdirs = "$(DESTDIR)$(prssdistpixdir)"
DATA = $(prssdistpix_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@list='$(prssdistpix_DATA)'; test -n "$(prssdistpixdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(prssdistpixdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
+
+ctags CTAGS:
-ctags: CTAGS
-CTAGS:
+cscope cscopelist:
distdir: $(DISTFILES)
.MAKE: install-am install-strip
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-prssdistpixDATA install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am uninstall-prssdistpixDATA
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+ ctags-am distclean distclean-generic distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-prssdistpixDATA install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags-am uninstall uninstall-am \
+ uninstall-prssdistpixDATA
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+ $(MAKE) en@quot.po-update
+en@boldquot.po-create:
+ $(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en@quot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
note.c note.h \
pstr.c pstr.h \
ptime.c ptime.h \
+ settings.c settings.h \
tw.c tw.h \
ui.c ui.h \
ui_newtask_diag.c ui_newtask_diag.h \
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
host_triplet = @host@
bin_PROGRAMS = ptask$(EXEEXT)
subdir = src
-DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/depcomp $(dist_man_MANS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
PROGRAMS = $(bin_PROGRAMS)
am_ptask_OBJECTS = list.$(OBJEXT) log.$(OBJEXT) main.$(OBJEXT) \
- note.$(OBJEXT) pstr.$(OBJEXT) ptime.$(OBJEXT) tw.$(OBJEXT) \
- ui.$(OBJEXT) ui_newtask_diag.$(OBJEXT) \
- ui_projecttree.$(OBJEXT) ui_taskpanel.$(OBJEXT) \
- ui_tasktree.$(OBJEXT)
+ note.$(OBJEXT) pstr.$(OBJEXT) ptime.$(OBJEXT) \
+ settings.$(OBJEXT) tw.$(OBJEXT) ui.$(OBJEXT) \
+ ui_newtask_diag.$(OBJEXT) ui_projecttree.$(OBJEXT) \
+ ui_taskpanel.$(OBJEXT) ui_tasktree.$(OBJEXT)
ptask_OBJECTS = $(am_ptask_OBJECTS)
ptask_LDADD = $(LDADD)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
SOURCES = $(ptask_SOURCES)
DIST_SOURCES = $(ptask_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
MANS = $(dist_man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
note.c note.h \
pstr.c pstr.h \
ptime.c ptime.h \
+ settings.c settings.h \
tw.c tw.h \
ui.c ui.h \
ui_newtask_diag.c ui_newtask_diag.h \
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
+ while read p p1; do if test -f $$p \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
ptask$(EXEEXT): $(ptask_OBJECTS) $(ptask_DEPENDENCIES) $(EXTRA_ptask_DEPENDENCIES)
@rm -f ptask$(EXEEXT)
- $(LINK) $(ptask_OBJECTS) $(ptask_LDADD) $(LIBS)
+ $(AM_V_CCLD)$(LINK) $(ptask_OBJECTS) $(ptask_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/note.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pstr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptime.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/settings.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tw.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ui.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ui_newtask_diag.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ui_tasktree.Po@am__quote@
.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
install-man1: $(dist_man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically \`make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
uninstall-man: uninstall-man1
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-binPROGRAMS \
- clean-generic ctags ctags-recursive distclean \
- distclean-compile distclean-generic distclean-tags distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-binPROGRAMS install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man1 install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am uninstall-binPROGRAMS uninstall-man \
- uninstall-man1
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+ check-am clean clean-binPROGRAMS clean-generic cscopelist-am \
+ ctags ctags-am distclean distclean-compile distclean-generic \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-binPROGRAMS install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-man1 install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
ptask.1: main.c $(top_srcdir)/configure.ac
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
build_triplet = @build@
host_triplet = @host@
subdir = src/glade
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
}
am__installdirs = "$(DESTDIR)$(gladedir)"
DATA = $(glade_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@list='$(glade_DATA)'; test -n "$(gladedir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(gladedir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
+
+ctags CTAGS:
-ctags: CTAGS
-CTAGS:
+cscope cscopelist:
distdir: $(DISTFILES)
.MAKE: install-am install-strip
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-gladeDATA \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am uninstall-gladeDATA
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+ ctags-am distclean distclean-generic distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-gladeDATA install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags-am uninstall uninstall-am \
+ uninstall-gladeDATA
# Tell versions [3.59,3.63) of GNU make to not export all variables.
</packing>
</child>
<child>
- <placeholder/>
+ <object class="GtkGrid" id="grid1">
+ <property name="visible">True</property>
+ <property name="can_focus">False</property>
+ <child>
+ <object class="GtkLabel" id="label9">
+ <property name="visible">True</property>
+ <property name="can_focus">False</property>
+ <property name="label" translatable="yes">Notes directory: </property>
+ </object>
+ <packing>
+ <property name="left_attach">0</property>
+ <property name="top_attach">0</property>
+ <property name="width">1</property>
+ <property name="height">1</property>
+ </packing>
+ </child>
+ <child>
+ <object class="GtkFileChooserButton" id="filechooserbutton1">
+ <property name="visible">True</property>
+ <property name="can_focus">False</property>
+ <property name="hexpand">True</property>
+ <property name="orientation">vertical</property>
+ <property name="action">select-folder</property>
+ <property name="title" translatable="yes">Select a directory</property>
+ </object>
+ <packing>
+ <property name="left_attach">1</property>
+ <property name="top_attach">0</property>
+ <property name="width">1</property>
+ <property name="height">1</property>
+ </packing>
+ </child>
+ </object>
+ <packing>
+ <property name="expand">False</property>
+ <property name="fill">True</property>
+ <property name="position">1</property>
+ </packing>
</child>
</object>
</child>
<property name="can_focus">False</property>
<property name="use_underline">True</property>
<property name="use_stock">True</property>
+ <signal name="activate" handler="preferences_activate_cbk" swapped="no"/>
</object>
</child>
<child>
#include <log.h>
#include <note.h>
+#include <settings.h>
#include <tw.h>
#include <ui.h>
#include <ui_projecttree.h>
static const char *program_name;
static struct task **tasks;
-static GSettings *settings;
static struct option long_options[] = {
{"version", no_argument, 0, 'v'},
gtk_init(NULL, NULL);
- settings = g_settings_new("ptask");
+ settings_init();
builder = gtk_builder_new();
gtk_builder_add_from_file
(builder,
PACKAGE_DATA_DIR G_DIR_SEPARATOR_S "ptask.glade",
NULL);
- window = create_window(builder, settings);
+ window = create_window(builder);
gtk_builder_connect_signals(builder, NULL);
#include <log.h>
#include <note.h>
-static char *get_path(const char *uuid)
+static char *get_default_path(const char *uuid)
{
char *home, *dir, *path;
return path;
}
+static char *get_path(const char *uuid)
+{
+ return get_default_path(uuid);
+}
+
void note_put(const char *uuid, const char *note)
{
char *path;
--- /dev/null
+/*
+ * Copyright (C) 2012-2013 jeanfi@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <settings.h>
+
+const char *SETTINGS_KEY_WINDOW_WIDTH = "window-width";
+const char *SETTINGS_KEY_WINDOW_HEIGHT = "window-height";
+const char *SETTINGS_KEY_WINDOW_X = "window-x";
+const char *SETTINGS_KEY_WINDOW_Y = "window-y";
+const char *SETTINGS_KEY_SPLITER_VERTICAL_POS = "spliter-vertical-pos";
+const char *SETTINGS_KEY_SPLITER_HORIZONTAL_POS = "spliter-horizontal-pos";
+const char *SETTINGS_KEY_TASKS_SORT_COL = "tasks-sort-col";
+const char *SETTINGS_KEY_TASKS_SORT_ORDER = "tasks-sort-order";
+
+const char * const SETTINGS_VISIBLE_COL_KEYS[] = {
+ "tasktree-id-visible",
+ "tasktree-description-visible",
+ "tasktree-project-visible",
+ "tasktree-uuid-visible",
+ "tasktree-priority-visible",
+ "tasktree-urgency-visible",
+ "tasktree-creation-date-visible",
+ "tasktree-due-visible",
+ "tasktree-start-visible",
+};
+
+static GSettings *settings;
+
+void settings_init()
+{
+ settings = g_settings_new("ptask");
+}
+
+gint settings_get_int(const gchar *key)
+{
+ return g_settings_get_int(settings, key);
+}
+
+void settings_set_int(const gchar *key, gint value)
+{
+ g_settings_set_int(settings, key, value);
+}
+
+gboolean settings_get_boolean(const gchar *key)
+{
+ return g_settings_get_boolean(settings, key);
+}
+
+void settings_set_boolean(const gchar *key, gboolean value)
+{
+ g_settings_set_boolean(settings, key, value);
+}
--- /dev/null
+/*
+ * Copyright (C) 2012-2013 jeanfi@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _PTASK_SETTINGS_H_
+#define _PTASK_SETTINGS_H_
+
+#include <gtk/gtk.h>
+
+extern const char *SETTINGS_KEY_WINDOW_WIDTH;
+extern const char *SETTINGS_KEY_WINDOW_HEIGHT;
+extern const char *SETTINGS_KEY_WINDOW_X;
+extern const char *SETTINGS_KEY_WINDOW_Y;
+extern const char *SETTINGS_KEY_SPLITER_VERTICAL_POS;
+extern const char *SETTINGS_KEY_SPLITER_HORIZONTAL_POS;
+extern const char *SETTINGS_KEY_TASKS_SORT_COL;
+extern const char *SETTINGS_KEY_TASKS_SORT_ORDER;
+extern const char * const SETTINGS_VISIBLE_COL_KEYS[];
+
+void settings_init();
+
+gint settings_get_int(const gchar *key);
+void settings_set_int(const gchar *key, gint value);
+gboolean settings_get_boolean(const gchar *key);
+void settings_set_boolean(const gchar *key, gboolean value);
+
+#endif
#include <glib/gi18n.h>
#include <log.h>
+#include <settings.h>
#include <ui.h>
#include <ui_newtask_diag.h>
#include <ui_projecttree.h>
#include <ui_tasktree.h>
static GtkComboBox *w_status;
-static GSettings *gsettings;
static GtkWindow *window;
static GtkPaned *vpaned;
static GtkPaned *hpaned;
return FALSE;
}
-static void save_settings(GtkWindow *window, GSettings *settings)
+static void save_settings(GtkWindow *window)
{
int w, h, x, y, pos;
log_fct("x=%d, y=%d, w=%d, h=%d", x, y, w, h);
- g_settings_set_int(settings, "window-width", w);
- g_settings_set_int(settings, "window-height", h);
- g_settings_set_int(settings, "window-x", x);
- g_settings_set_int(settings, "window-y", y);
+ settings_set_int(SETTINGS_KEY_WINDOW_WIDTH, w);
+ settings_set_int(SETTINGS_KEY_WINDOW_HEIGHT, h);
+ settings_set_int(SETTINGS_KEY_WINDOW_X, x);
+ settings_set_int(SETTINGS_KEY_WINDOW_Y, y);
pos = gtk_paned_get_position(vpaned);
- g_settings_set_int(settings, "spliter-vertical-pos", pos);
+ settings_set_int(SETTINGS_KEY_SPLITER_VERTICAL_POS, pos);
pos = gtk_paned_get_position(hpaned);
- g_settings_set_int(settings, "spliter-horizontal-pos", pos);
+ settings_set_int(SETTINGS_KEY_SPLITER_HORIZONTAL_POS, pos);
- ui_tasktree_save_settings(settings);
+ ui_tasktree_save_settings();
g_settings_sync();
}
static void ui_quit()
{
- save_settings(window, gsettings);
+ save_settings(window);
gtk_widget_destroy(GTK_WIDGET(window));
gtk_main_quit();
}
return FALSE;
}
-GtkWindow *create_window(GtkBuilder *builder, GSettings *settings)
+GtkWindow *create_window(GtkBuilder *builder)
{
int x, y, w, h, pos;
- gsettings = settings;
-
window = GTK_WINDOW(gtk_builder_get_object(builder, "window"));
w_status = GTK_COMBO_BOX(gtk_builder_get_object(builder, "status"));
"changed", (GCallback)status_changed_cbk,
NULL);
- w = g_settings_get_int(settings, "window-width");
- h = g_settings_get_int(settings, "window-height");
+ w = settings_get_int(SETTINGS_KEY_WINDOW_WIDTH);
+ h = settings_get_int(SETTINGS_KEY_WINDOW_HEIGHT);
gtk_window_set_default_size(window, w, h);
- x = g_settings_get_int(settings, "window-x");
- y = g_settings_get_int(settings, "window-y");
+ x = settings_get_int(SETTINGS_KEY_WINDOW_X);
+ y = settings_get_int(SETTINGS_KEY_WINDOW_Y);
gtk_window_move(window, x, y);
vpaned = GTK_PANED(gtk_builder_get_object(builder, "vpaned"));
- pos = g_settings_get_int(settings, "spliter-vertical-pos");
+ pos = settings_get_int(SETTINGS_KEY_SPLITER_VERTICAL_POS);
gtk_paned_set_position(vpaned, pos);
hpaned = GTK_PANED(gtk_builder_get_object(builder, "hpaned"));
- pos = g_settings_get_int(settings, "spliter-horizontal-pos");
+ pos = settings_get_int(SETTINGS_KEY_SPLITER_HORIZONTAL_POS);
gtk_paned_set_position(hpaned, pos);
g_signal_connect(window, "delete_event",
- G_CALLBACK(delete_event_cbk), settings);
+ G_CALLBACK(delete_event_cbk), NULL);
ui_taskpanel_init(builder);
ui_tasktree_init(builder);
ui_projecttree_init(builder);
- ui_tasktree_load_settings(settings);
+ ui_tasktree_load_settings();
return window;
}
log_fct_exit();
}
+
+
+void preferences_activate_cbk(GtkWidget *menu_item, gpointer data)
+{
+ gint result;
+ static GtkDialog *diag;
+ GtkBuilder *builder;
+
+ builder = gtk_builder_new();
+ gtk_builder_add_from_file
+ (builder,
+ PACKAGE_DATA_DIR G_DIR_SEPARATOR_S "ptask.glade",
+ NULL);
+ diag = GTK_DIALOG(gtk_builder_get_object(builder, "diag_preferences"));
+ gtk_builder_connect_signals(builder, NULL);
+
+ result = gtk_dialog_run(diag);
+
+ if (result == GTK_RESPONSE_ACCEPT)
+ log_debug("preferences_activate_cbk(): accept");
+ else
+ log_debug("preferences_activate_cbk(): cancel");
+
+ g_object_unref(G_OBJECT(builder));
+
+ gtk_widget_destroy(GTK_WIDGET(diag));
+}
+
void about_activate_cbk(GtkWidget *menu_item, gpointer data)
{
log_fct_enter();
#include <gtk/gtk.h>
-GtkWindow *create_window(GtkBuilder *, GSettings *);
+GtkWindow *create_window(GtkBuilder *);
void refresh();
const char *ui_get_status_filter();
#include <log.h>
#include <ptime.h>
+#include <settings.h>
#include <ui_projecttree.h>
#include <ui_taskpanel.h>
#include <ui_tasktree.h>
-static const char * const SETTINGS_KEYS[] = {
- "tasktree-id-visible",
- "tasktree-description-visible",
- "tasktree-project-visible",
- "tasktree-uuid-visible",
- "tasktree-priority-visible",
- "tasktree-urgency-visible",
- "tasktree-creation-date-visible",
- "tasktree-due-visible",
- "tasktree-start-visible",
-};
-
static const char * const MENU_NAMES[] = {
"menu_id_visible",
"menu_description_visible",
"menu_start_visible",
};
-static GSettings *gsettings;
static GtkTreeView *w_treeview;
static GtkMenu *w_menu;
static struct task **current_tasks;
(gtk_builder_get_object(builder, MENU_NAMES[i]));
}
-void ui_tasktree_load_settings(GSettings *settings)
+void ui_tasktree_load_settings()
{
int sort_col_id, i;
GtkSortType sort_order;
const char *key;
gboolean b;
-
- gsettings = settings;
-
- sort_col_id = g_settings_get_int(settings, "tasks-sort-col");
- sort_order = g_settings_get_int(settings, "tasks-sort-order");
+ sort_col_id = settings_get_int(SETTINGS_KEY_TASKS_SORT_COL);
+ sort_order = settings_get_int(SETTINGS_KEY_TASKS_SORT_ORDER);
model = gtk_tree_view_get_model(GTK_TREE_VIEW(w_treeview));
gtk_tree_sortable_set_sort_column_id(GTK_TREE_SORTABLE(model),
sort_col_id, sort_order);
for (i = 0; i < COL_COUNT; i++) {
- key = SETTINGS_KEYS[i];
- b = g_settings_get_boolean(gsettings, key);
+ key = SETTINGS_VISIBLE_COL_KEYS[i];
+ b = settings_get_boolean(key);
gtk_tree_view_column_set_visible(w_cols[i], b);
}
for (i = 0; i < COL_COUNT; i++) {
- key = SETTINGS_KEYS[i];
- b = g_settings_get_boolean(gsettings, key);
+ key = SETTINGS_VISIBLE_COL_KEYS[i];
+ b = settings_get_boolean(key);
gtk_check_menu_item_set_active(w_menus[i], b);
}
}
-void ui_tasktree_save_settings(GSettings *settings)
+void ui_tasktree_save_settings()
{
int sort_col_id;
GtkTreeModel *model;
log_debug("ui_tasktree_save_settings(): sort_col_id=%d", sort_col_id);
log_debug("ui_tasktree_save_settings(): sort_col_order=%d", sort_order);
- g_settings_set_int(settings, "tasks-sort-col", sort_col_id);
- g_settings_set_int(settings, "tasks-sort-order", sort_order);
+ settings_set_int(SETTINGS_KEY_TASKS_SORT_COL, sort_col_id);
+ settings_set_int(SETTINGS_KEY_TASKS_SORT_ORDER, sort_order);
}
const char *ui_tasktree_get_task_uuid()
id = -1;
if (id != -1) {
- key = SETTINGS_KEYS[id];
- b = g_settings_get_boolean(gsettings, key);
- g_settings_set_boolean(gsettings, key, !b);
+ key = SETTINGS_VISIBLE_COL_KEYS[id];
+ b = settings_get_boolean(key);
+ settings_set_boolean(key, !b);
gtk_tree_view_column_set_visible(w_cols[id], !b);
}
}
#include <tw.h>
void ui_tasktree_init(GtkBuilder *);
-void ui_tasktree_load_settings(GSettings *);
-void ui_tasktree_save_settings(GSettings *);
+void ui_tasktree_load_settings();
+void ui_tasktree_save_settings();
struct task *ui_tasktree_get_selected_task();
void ui_tasktree_set_selected_task(const char *uuid);
const char *ui_tasktree_get_task_uuid();
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
host_triplet = @host@
@CPPCHECK_TRUE@am__append_1 = test-cppcheck.sh
subdir = tests
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/test-driver
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__tty_colors_dummy = \
+ mgn= red= grn= lgn= blu= brg= std=; \
+ am__color_tests=no
+am__tty_colors = { \
+ $(am__tty_colors_dummy); \
+ if test "X$(AM_COLOR_TESTS)" = Xno; then \
+ am__color_tests=no; \
+ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+ am__color_tests=yes; \
+ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+ am__color_tests=yes; \
+ fi; \
+ if test $$am__color_tests = yes; then \
+ red='\e[0;31m'; \
+ grn='\e[0;32m'; \
+ lgn='\e[1;32m'; \
+ blu='\e[1;34m'; \
+ mgn='\e[0;35m'; \
+ brg='\e[1m'; \
+ std='\e[m'; \
+ fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__recheck_rx = ^[ ]*:recheck:[ ]*
+am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
+am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+ recheck = 1; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ { \
+ if ((getline line2 < ($$0 ".log")) < 0) \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+ { \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+ { \
+ break; \
+ } \
+ }; \
+ if (recheck) \
+ print $$0; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+ print "fatal: making $@: " msg | "cat >&2"; \
+ exit 1; \
+} \
+function rst_section(header) \
+{ \
+ print header; \
+ len = length(header); \
+ for (i = 1; i <= len; i = i + 1) \
+ printf "="; \
+ printf "\n\n"; \
+} \
+{ \
+ copy_in_global_log = 1; \
+ global_test_result = "RUN"; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".trs"); \
+ if (line ~ /$(am__global_test_result_rx)/) \
+ { \
+ sub("$(am__global_test_result_rx)", "", line); \
+ sub("[ ]*$$", "", line); \
+ global_test_result = line; \
+ } \
+ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+ copy_in_global_log = 0; \
+ }; \
+ if (copy_in_global_log) \
+ { \
+ rst_section(global_test_result ": " $$0); \
+ while ((rc = (getline line < ($$0 ".log"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".log"); \
+ print line; \
+ }; \
+ printf "\n"; \
+ }; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+ --color-tests "$$am__color_tests" \
+ --enable-hard-errors "$$am__enable_hard_errors" \
+ --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test. Creates the
+# directory for the log if needed. Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log. Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup); \
+$(am__vpath_adj_setup) $(am__vpath_adj) \
+$(am__tty_colors); \
+srcdir=$(srcdir); export srcdir; \
+case "$@" in \
+ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
+ *) am__odir=.;; \
+esac; \
+test "x$$am__odir" = x"." || test -d "$$am__odir" \
+ || $(MKDIR_P) "$$am__odir" || exit $$?; \
+if test -f "./$$f"; then dir=./; \
+elif test -f "$$f"; then dir=; \
+else dir="$(srcdir)/"; fi; \
+tst=$$dir$$f; log='$@'; \
+if test -n '$(DISABLE_HARD_ERRORS)'; then \
+ am__enable_hard_errors=no; \
+else \
+ am__enable_hard_errors=yes; \
+fi; \
+case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
+ am__expect_failure=yes;; \
+ *) \
+ am__expect_failure=no;; \
+esac; \
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed). The result is saved in the shell variable
+# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+ bases='$(TEST_LOGS)'; \
+ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+ bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+ case '$@' in \
+ */*) \
+ case '$*' in \
+ */*) b='$*';; \
+ *) b=`echo '$@' | sed 's/\.log$$//'`; \
+ esac;; \
+ *) \
+ b='$*';; \
+ esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+ $(TEST_LOG_FLAGS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
all: all-am
.SUFFIXES:
+.SUFFIXES: .log .test .test$(EXEEXT) .trs
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-check-TESTS: $(TESTS)
- @failed=0; all=0; xfail=0; xpass=0; skip=0; \
- srcdir=$(srcdir); export srcdir; \
- list=' $(TESTS) '; \
- $(am__tty_colors); \
- if test -n "$$list"; then \
- for tst in $$list; do \
- if test -f ./$$tst; then dir=./; \
- elif test -f $$tst; then dir=; \
- else dir="$(srcdir)/"; fi; \
- if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$tst[\ \ ]*) \
- xpass=`expr $$xpass + 1`; \
- failed=`expr $$failed + 1`; \
- col=$$red; res=XPASS; \
- ;; \
- *) \
- col=$$grn; res=PASS; \
- ;; \
- esac; \
- elif test $$? -ne 77; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$tst[\ \ ]*) \
- xfail=`expr $$xfail + 1`; \
- col=$$lgn; res=XFAIL; \
- ;; \
- *) \
- failed=`expr $$failed + 1`; \
- col=$$red; res=FAIL; \
- ;; \
- esac; \
- else \
- skip=`expr $$skip + 1`; \
- col=$$blu; res=SKIP; \
- fi; \
- echo "$${col}$$res$${std}: $$tst"; \
- done; \
- if test "$$all" -eq 1; then \
- tests="test"; \
- All=""; \
- else \
- tests="tests"; \
- All="All "; \
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+ rm -f $< $@
+ $(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+ @:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+ @$(am__set_TESTS_bases); \
+ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+ redo_bases=`for i in $$bases; do \
+ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+ done`; \
+ if test -n "$$redo_bases"; then \
+ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+ if $(am__make_dryrun); then :; else \
+ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
fi; \
- if test "$$failed" -eq 0; then \
- if test "$$xfail" -eq 0; then \
- banner="$$All$$all $$tests passed"; \
- else \
- if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
- banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
- fi; \
- else \
- if test "$$xpass" -eq 0; then \
- banner="$$failed of $$all $$tests failed"; \
+ fi; \
+ if test -n "$$am__remaking_logs"; then \
+ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+ "recursion detected" >&2; \
+ else \
+ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+ fi; \
+ if $(am__make_dryrun); then :; else \
+ st=0; \
+ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+ for i in $$redo_bases; do \
+ test -f $$i.trs && test -r $$i.trs \
+ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+ test -f $$i.log && test -r $$i.log \
+ || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+ done; \
+ test $$st -eq 0 || exit 1; \
+ fi
+ @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+ ws='[ ]'; \
+ results=`for b in $$bases; do echo $$b.trs; done`; \
+ test -n "$$results" || results=/dev/null; \
+ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
+ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
+ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
+ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
+ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+ if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+ success=true; \
+ else \
+ success=false; \
+ fi; \
+ br='==================='; br=$$br$$br$$br$$br; \
+ result_count () \
+ { \
+ if test x"$$1" = x"--maybe-color"; then \
+ maybe_colorize=yes; \
+ elif test x"$$1" = x"--no-color"; then \
+ maybe_colorize=no; \
else \
- if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
- banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
+ echo "$@: invalid 'result_count' usage" >&2; exit 4; \
fi; \
- fi; \
- dashes="$$banner"; \
- skipped=""; \
- if test "$$skip" -ne 0; then \
- if test "$$skip" -eq 1; then \
- skipped="($$skip test was not run)"; \
+ shift; \
+ desc=$$1 count=$$2; \
+ if test $$maybe_colorize = yes && test $$count -gt 0; then \
+ color_start=$$3 color_end=$$std; \
else \
- skipped="($$skip tests were not run)"; \
+ color_start= color_end=; \
fi; \
- test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$skipped"; \
- fi; \
- report=""; \
- if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
- report="Please report to $(PACKAGE_BUGREPORT)"; \
- test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$report"; \
- fi; \
- dashes=`echo "$$dashes" | sed s/./=/g`; \
- if test "$$failed" -eq 0; then \
- col="$$grn"; \
- else \
- col="$$red"; \
- fi; \
- echo "$${col}$$dashes$${std}"; \
- echo "$${col}$$banner$${std}"; \
- test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
- test -z "$$report" || echo "$${col}$$report$${std}"; \
- echo "$${col}$$dashes$${std}"; \
- test "$$failed" -eq 0; \
- else :; fi
+ echo "$${color_start}# $$desc $$count$${color_end}"; \
+ }; \
+ create_testsuite_report () \
+ { \
+ result_count $$1 "TOTAL:" $$all "$$brg"; \
+ result_count $$1 "PASS: " $$pass "$$grn"; \
+ result_count $$1 "SKIP: " $$skip "$$blu"; \
+ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+ result_count $$1 "FAIL: " $$fail "$$red"; \
+ result_count $$1 "XPASS:" $$xpass "$$red"; \
+ result_count $$1 "ERROR:" $$error "$$mgn"; \
+ }; \
+ { \
+ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
+ $(am__rst_title); \
+ create_testsuite_report --no-color; \
+ echo; \
+ echo ".. contents:: :depth: 2"; \
+ echo; \
+ for b in $$bases; do echo $$b; done \
+ | $(am__create_global_log); \
+ } >$(TEST_SUITE_LOG).tmp || exit 1; \
+ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
+ if $$success; then \
+ col="$$grn"; \
+ else \
+ col="$$red"; \
+ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
+ fi; \
+ echo "$${col}$$br$${std}"; \
+ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
+ echo "$${col}$$br$${std}"; \
+ create_testsuite_report --maybe-color; \
+ echo "$$col$$br$$std"; \
+ if $$success; then :; else \
+ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
+ fi; \
+ echo "$$col$$br$$std"; \
+ fi; \
+ $$success || exit 1
+
+check-TESTS:
+ @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
+ @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+ exit $$?;
+recheck: all
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ bases=`for i in $$bases; do echo $$i; done \
+ | $(am__list_recheck_tests)` || exit 1; \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ log_list=`echo $$log_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+ am__force_recheck=am--force-recheck \
+ TEST_LOGS="$$log_list"; \
+ exit $$?
+test-cppcheck.sh.log: test-cppcheck.sh
+ @p='test-cppcheck.sh'; \
+ b='test-cppcheck.sh'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+ @p='$<'; \
+ $(am__set_b); \
+ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@ @p='$<'; \
+@am__EXEEXT_TRUE@ $(am__set_b); \
+@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
+ -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+ -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+ -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
clean-generic:
.MAKE: check-am install-am install-strip
.PHONY: all all-am check check-TESTS check-am check-local clean \
- clean-generic distclean distclean-generic distdir dvi dvi-am \
- html html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-am
+ clean-generic cscopelist-am ctags-am distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am recheck tags-am \
+ uninstall uninstall-am
check-local: checkpatch.pl
find $(top_srcdir)/src -name \*.c -exec $(srcdir)/checkpatch.pl --ignore SPLIT_STRING --show-types -q --no-tree -emacs -f {} \;
projects / ptask.git / commitdiff