1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
19 am__make_running_with_option = \
20 case $${target_option-} in \
22 *) echo "am__make_running_with_option: internal error: invalid" \
23 "target option '$${target_option-}' specified" >&2; \
27 sane_makeflags=$$MAKEFLAGS; \
28 if $(am__is_gnu_make); then \
29 sane_makeflags=$$MFLAGS; \
34 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
35 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
41 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
43 for flg in $$sane_makeflags; do \
44 test $$skip_next = yes && { skip_next=no; continue; }; \
47 -*I) strip_trailopt 'I'; skip_next=yes;; \
48 -*I?*) strip_trailopt 'I';; \
49 -*O) strip_trailopt 'O'; skip_next=yes;; \
50 -*O?*) strip_trailopt 'O';; \
51 -*l) strip_trailopt 'l'; skip_next=yes;; \
52 -*l?*) strip_trailopt 'l';; \
53 -[dEDm]) skip_next=yes;; \
54 -[JT]) skip_next=yes;; \
57 *$$target_option*) has_opt=yes; break;; \
61 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
62 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
63 pkgdatadir = $(datadir)/@PACKAGE@
64 pkgincludedir = $(includedir)/@PACKAGE@
65 pkglibdir = $(libdir)/@PACKAGE@
66 pkglibexecdir = $(libexecdir)/@PACKAGE@
67 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
68 install_sh_DATA = $(install_sh) -c -m 644
69 install_sh_PROGRAM = $(install_sh) -c
70 install_sh_SCRIPT = $(install_sh) -c
71 INSTALL_HEADER = $(INSTALL_DATA)
72 transform = $(program_transform_name)
79 build_triplet = @build@
82 DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
83 $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
84 $(top_srcdir)/configure $(am__configure_deps) \
85 $(srcdir)/config.h.in ABOUT-NLS $(dist_doc_DATA) COPYING \
86 ar-lib compile config.guess config.rpath config.sub depcomp \
88 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
89 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
90 $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
91 $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
92 $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
93 $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
94 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
96 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
97 configure.lineno config.status.lineno
98 mkinstalldirs = $(install_sh) -d
99 CONFIG_HEADER = config.h
101 CONFIG_CLEAN_VPATH_FILES =
102 AM_V_P = $(am__v_P_@AM_V@)
103 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
106 AM_V_GEN = $(am__v_GEN_@AM_V@)
107 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
108 am__v_GEN_0 = @echo " GEN " $@;
110 AM_V_at = $(am__v_at_@AM_V@)
111 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
116 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
117 ctags-recursive dvi-recursive html-recursive info-recursive \
118 install-data-recursive install-dvi-recursive \
119 install-exec-recursive install-html-recursive \
120 install-info-recursive install-pdf-recursive \
121 install-ps-recursive install-recursive installcheck-recursive \
122 installdirs-recursive pdf-recursive ps-recursive \
123 tags-recursive uninstall-recursive
124 am__can_run_installinfo = \
125 case $$AM_UPDATE_INFO_DIR in \
127 *) (install-info --version) >/dev/null 2>&1;; \
129 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
130 am__vpath_adj = case $$p in \
131 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
134 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
136 am__nobase_strip_setup = \
137 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
139 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
140 am__nobase_list = $(am__nobase_strip_setup); \
141 for p in $$list; do echo "$$p $$p"; done | \
142 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
143 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
144 if (++n[$$2] == $(am__install_max)) \
145 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
146 END { for (dir in files) print dir, files[dir] }'
148 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
149 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
150 am__uninstall_files_from_dir = { \
152 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
153 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
154 $(am__cd) "$$dir" && rm -f $$files; }; \
156 am__installdirs = "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"
157 DATA = $(desktop_DATA) $(dist_doc_DATA)
158 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
159 distclean-recursive maintainer-clean-recursive
160 am__recursive_targets = \
161 $(RECURSIVE_TARGETS) \
162 $(RECURSIVE_CLEAN_TARGETS) \
163 $(am__extra_recursive_targets)
164 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
165 cscope distdir dist dist-all distcheck
166 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
168 # Read a list of newline-separated strings from the standard input,
169 # and print each of them once, without duplicates. Input order is
171 am__uniquify_input = $(AWK) '\
172 BEGIN { nonempty = 0; } \
173 { items[$$0] = 1; nonempty = 1; } \
174 END { if (nonempty) { for (i in items) print i; }; } \
176 # Make sure the list of sources is unique. This is necessary because,
177 # e.g., the same source file might be shared among _SOURCES variables
178 # for different programs/libraries.
179 am__define_uniq_tagged_files = \
180 list='$(am__tagged_files)'; \
181 unique=`for i in $$list; do \
182 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
183 done | $(am__uniquify_input)`
187 DIST_SUBDIRS = $(SUBDIRS)
188 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
189 distdir = $(PACKAGE)-$(VERSION)
190 top_distdir = $(distdir)
191 am__remove_distdir = \
192 if test -d "$(distdir)"; then \
193 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
194 && rm -rf "$(distdir)" \
195 || { sleep 5 && rm -rf "$(distdir)"; }; \
197 am__post_remove_distdir = $(am__remove_distdir)
200 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
201 sed_rest='s,^[^/]*/*,,'; \
202 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
203 sed_butlast='s,/*[^/]*$$,,'; \
204 while test -n "$$dir1"; do \
205 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
206 if test "$$first" != "."; then \
207 if test "$$first" = ".."; then \
208 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
209 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
211 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
212 if test "$$first2" = "$$first"; then \
213 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
217 dir0="$$dir0"/"$$first"; \
220 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
223 DIST_ARCHIVES = $(distdir).tar.gz
225 DIST_TARGETS = dist-gzip
226 distuninstallcheck_listfiles = find . -type f -print
227 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
228 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
229 distcleancheck_listfiles = find . -type f -print
232 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
233 APPINDICATOR_CFLAGS = @APPINDICATOR_CFLAGS@
234 APPINDICATOR_LIBS = @APPINDICATOR_LIBS@
236 ASCIIDOC = @ASCIIDOC@
237 ATASMART_CFLAGS = @ATASMART_CFLAGS@
238 ATASMART_LIBS = @ATASMART_LIBS@
239 AUTOCONF = @AUTOCONF@
240 AUTOHEADER = @AUTOHEADER@
241 AUTOMAKE = @AUTOMAKE@
244 CCDEPMODE = @CCDEPMODE@
247 CPPFLAGS = @CPPFLAGS@
248 CURL_CFLAGS = @CURL_CFLAGS@
249 CURL_LIBS = @CURL_LIBS@
250 CYGPATH_W = @CYGPATH_W@
258 GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
260 GMSGFMT_015 = @GMSGFMT_015@
262 GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
263 GTK_CFLAGS = @GTK_CFLAGS@
264 GTK_LIBS = @GTK_LIBS@
265 GTOP_CFLAGS = @GTOP_CFLAGS@
266 GTOP_LIBS = @GTOP_LIBS@
267 HAVE_CPPCHECK = @HAVE_CPPCHECK@
268 HELP2MAN = @HELP2MAN@
270 INSTALL_DATA = @INSTALL_DATA@
271 INSTALL_PROGRAM = @INSTALL_PROGRAM@
272 INSTALL_SCRIPT = @INSTALL_SCRIPT@
273 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
274 INTLLIBS = @INTLLIBS@
275 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
276 JSON_CFLAGS = @JSON_CFLAGS@
277 JSON_LIBS = @JSON_LIBS@
279 LIBATIADL_CFLAGS = @LIBATIADL_CFLAGS@
280 LIBATIADL_LIBS = @LIBATIADL_LIBS@
281 LIBICONV = @LIBICONV@
283 LIBMICROHTTPD_CFLAGS = @LIBMICROHTTPD_CFLAGS@
284 LIBMICROHTTPD_LIBS = @LIBMICROHTTPD_LIBS@
285 LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@
286 LIBNOTIFY_LIBS = @LIBNOTIFY_LIBS@
289 LIBUDISKS2_CFLAGS = @LIBUDISKS2_CFLAGS@
290 LIBUDISKS2_LIBS = @LIBUDISKS2_LIBS@
291 LTLIBICONV = @LTLIBICONV@
292 LTLIBINTL = @LTLIBINTL@
293 LTLIBOBJS = @LTLIBOBJS@
294 MAKEINFO = @MAKEINFO@
297 MSGFMT_015 = @MSGFMT_015@
298 MSGMERGE = @MSGMERGE@
299 NVIDIA_CFLAGS = @NVIDIA_CFLAGS@
300 NVIDIA_LIBS = @NVIDIA_LIBS@
303 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
304 PACKAGE_NAME = @PACKAGE_NAME@
305 PACKAGE_STRING = @PACKAGE_STRING@
306 PACKAGE_TARNAME = @PACKAGE_TARNAME@
307 PACKAGE_URL = @PACKAGE_URL@
308 PACKAGE_VERSION = @PACKAGE_VERSION@
309 PATH_SEPARATOR = @PATH_SEPARATOR@
310 PKG_CONFIG = @PKG_CONFIG@
311 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
312 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
314 PTHREAD_LIBS = @PTHREAD_LIBS@
316 SENSORS_LIBS = @SENSORS_LIBS@
317 SET_MAKE = @SET_MAKE@
320 UNITY_CFLAGS = @UNITY_CFLAGS@
321 UNITY_LIBS = @UNITY_LIBS@
324 X11_CFLAGS = @X11_CFLAGS@
325 X11_LIBS = @X11_LIBS@
326 XEXT_CFLAGS = @XEXT_CFLAGS@
327 XEXT_LIBS = @XEXT_LIBS@
328 XGETTEXT = @XGETTEXT@
329 XGETTEXT_015 = @XGETTEXT_015@
331 abs_builddir = @abs_builddir@
332 abs_srcdir = @abs_srcdir@
333 abs_top_builddir = @abs_top_builddir@
334 abs_top_srcdir = @abs_top_srcdir@
335 ac_ct_AR = @ac_ct_AR@
336 ac_ct_CC = @ac_ct_CC@
337 am__include = @am__include@
338 am__leading_dot = @am__leading_dot@
339 am__quote = @am__quote@
341 am__untar = @am__untar@
344 build_alias = @build_alias@
345 build_cpu = @build_cpu@
346 build_os = @build_os@
347 build_vendor = @build_vendor@
348 builddir = @builddir@
350 datarootdir = @datarootdir@
353 exec_prefix = @exec_prefix@
354 gsettingsschemadir = @gsettingsschemadir@
356 host_alias = @host_alias@
357 host_cpu = @host_cpu@
359 host_vendor = @host_vendor@
361 includedir = @includedir@
363 install_sh = @install_sh@
365 libexecdir = @libexecdir@
366 localedir = @localedir@
367 localstatedir = @localstatedir@
370 oldincludedir = @oldincludedir@
373 program_transform_name = @program_transform_name@
376 sharedstatedir = @sharedstatedir@
378 sysconfdir = @sysconfdir@
379 target_alias = @target_alias@
380 top_build_prefix = @top_build_prefix@
381 top_builddir = @top_builddir@
382 top_srcdir = @top_srcdir@
386 icons/hicolor/scalable \
387 icons/hicolor/14x14 \
388 icons/hicolor/16x16 \
389 icons/hicolor/22x22 \
390 icons/hicolor/24x24 \
391 icons/hicolor/32x32 \
392 icons/hicolor/48x48 \
393 icons/hicolor/64x64 \
394 icons/ubuntu-mono-dark/status/22 \
395 icons/ubuntu-mono-light/status/22 \
396 icons/ubuntu-mono-dark/apps/22 \
400 dist_doc_DATA = AUTHORS \
408 desktopdir = $(datadir)/applications
409 desktop_DATA = psensor.desktop
410 EXTRA_DIST = $(desktop_DATA) $(autostart_DATA)
412 $(MAKE) $(AM_MAKEFLAGS) all-recursive
415 am--refresh: Makefile
417 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
419 case '$(am__configure_deps)' in \
421 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
422 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
427 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
428 $(am__cd) $(top_srcdir) && \
429 $(AUTOMAKE) --gnu Makefile
431 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
434 echo ' $(SHELL) ./config.status'; \
435 $(SHELL) ./config.status;; \
437 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
438 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
441 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
442 $(SHELL) ./config.status --recheck
444 $(top_srcdir)/configure: $(am__configure_deps)
445 $(am__cd) $(srcdir) && $(AUTOCONF)
446 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
447 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
448 $(am__aclocal_m4_deps):
451 @test -f $@ || rm -f stamp-h1
452 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
454 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
456 cd $(top_builddir) && $(SHELL) ./config.status config.h
457 $(srcdir)/config.h.in: $(am__configure_deps)
458 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
463 -rm -f config.h stamp-h1
464 install-desktopDATA: $(desktop_DATA)
466 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
467 if test -n "$$list"; then \
468 echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \
469 $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \
471 for p in $$list; do \
472 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
474 done | $(am__base_list) | \
475 while read files; do \
476 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \
477 $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \
480 uninstall-desktopDATA:
482 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
483 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
484 dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
485 install-dist_docDATA: $(dist_doc_DATA)
487 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
488 if test -n "$$list"; then \
489 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
490 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
492 for p in $$list; do \
493 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
495 done | $(am__base_list) | \
496 while read files; do \
497 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
498 $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
501 uninstall-dist_docDATA:
503 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
504 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
505 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
507 # This directory's subdirectories are mostly independent; you can cd
508 # into them and run 'make' without going through this Makefile.
509 # To change the values of 'make' variables: instead of editing Makefiles,
510 # (1) if the variable is set in 'config.status', edit 'config.status'
511 # (which will cause the Makefiles to be regenerated when you run 'make');
512 # (2) otherwise, pass the desired values on the 'make' command line.
513 $(am__recursive_targets):
515 if $(am__make_keepgoing); then \
516 failcom='fail=yes'; \
521 target=`echo $@ | sed s/-recursive//`; \
523 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
524 *) list='$(SUBDIRS)' ;; \
526 for subdir in $$list; do \
527 echo "Making $$target in $$subdir"; \
528 if test "$$subdir" = "."; then \
530 local_target="$$target-am"; \
532 local_target="$$target"; \
534 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
537 if test "$$dot_seen" = "no"; then \
538 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
541 ID: $(am__tagged_files)
542 $(am__define_uniq_tagged_files); mkid -fID $$unique
546 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
549 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
550 include_option=--etags-include; \
553 include_option=--include; \
556 list='$(SUBDIRS)'; for subdir in $$list; do \
557 if test "$$subdir" = .; then :; else \
558 test ! -f $$subdir/TAGS || \
559 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
562 $(am__define_uniq_tagged_files); \
564 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
565 test -n "$$unique" || unique=$$empty_fix; \
566 if test $$# -gt 0; then \
567 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
570 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
574 ctags: ctags-recursive
577 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
578 $(am__define_uniq_tagged_files); \
579 test -z "$(CTAGS_ARGS)$$unique" \
580 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
584 here=`$(am__cd) $(top_builddir) && pwd` \
585 && $(am__cd) $(top_srcdir) \
586 && gtags -i $(GTAGS_ARGS) "$$here"
588 test ! -s cscope.files \
589 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
592 cscope.files: clean-cscope cscopelist
593 cscopelist: cscopelist-recursive
595 cscopelist-am: $(am__tagged_files)
596 list='$(am__tagged_files)'; \
597 case "$(srcdir)" in \
598 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
599 *) sdir=$(subdir)/$(srcdir) ;; \
601 for i in $$list; do \
602 if test -f "$$i"; then \
603 echo "$(subdir)/$$i"; \
607 done >> $(top_builddir)/cscope.files
610 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
611 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
613 distdir: $(DISTFILES)
614 $(am__remove_distdir)
615 test -d "$(distdir)" || mkdir "$(distdir)"
616 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
617 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
618 list='$(DISTFILES)'; \
619 dist_files=`for file in $$list; do echo $$file; done | \
620 sed -e "s|^$$srcdirstrip/||;t" \
621 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
622 case $$dist_files in \
623 */*) $(MKDIR_P) `echo "$$dist_files" | \
624 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
627 for file in $$dist_files; do \
628 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
629 if test -d $$d/$$file; then \
630 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
631 if test -d "$(distdir)/$$file"; then \
632 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
634 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
635 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
636 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
638 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
640 test -f "$(distdir)/$$file" \
641 || cp -p $$d/$$file "$(distdir)/$$file" \
645 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
646 if test "$$subdir" = .; then :; else \
648 || test -d "$(distdir)/$$subdir" \
649 || $(MKDIR_P) "$(distdir)/$$subdir" \
651 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
653 new_distdir=$$reldir; \
654 dir1=$$subdir; dir2="$(top_distdir)"; \
656 new_top_distdir=$$reldir; \
657 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
658 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
659 ($(am__cd) $$subdir && \
660 $(MAKE) $(AM_MAKEFLAGS) \
661 top_distdir="$$new_top_distdir" \
662 distdir="$$new_distdir" \
663 am__remove_distdir=: \
664 am__skip_length_check=: \
665 am__skip_mode_fix=: \
670 -test -n "$(am__skip_mode_fix)" \
671 || find "$(distdir)" -type d ! -perm -755 \
672 -exec chmod u+rwx,go+rx {} \; -o \
673 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
674 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
675 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
676 || chmod -R a+r "$(distdir)"
678 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
679 $(am__post_remove_distdir)
682 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
683 $(am__post_remove_distdir)
686 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
687 $(am__post_remove_distdir)
690 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
691 $(am__post_remove_distdir)
694 @echo WARNING: "Support for shar distribution archives is" \
696 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
697 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
698 $(am__post_remove_distdir)
701 @echo WARNING: "Support for distribution archives compressed with" \
702 "legacy program 'compress' is deprecated." >&2
703 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
704 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
705 $(am__post_remove_distdir)
708 -rm -f $(distdir).zip
709 zip -rq $(distdir).zip $(distdir)
710 $(am__post_remove_distdir)
713 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
714 $(am__post_remove_distdir)
716 # This target untars the dist file and tries a VPATH configuration. Then
717 # it guarantees that the distribution is self-contained by making another
720 case '$(DIST_ARCHIVES)' in \
722 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
724 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
726 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
728 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
730 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
732 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
734 unzip $(distdir).zip ;;\
736 chmod -R a-w $(distdir)
738 mkdir $(distdir)/_build $(distdir)/_inst
740 test -d $(distdir)/_build || exit 0; \
741 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
742 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
744 && $(am__cd) $(distdir)/_build \
746 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
747 $(DISTCHECK_CONFIGURE_FLAGS) \
748 --srcdir=.. --prefix="$$dc_install_base" \
749 && $(MAKE) $(AM_MAKEFLAGS) \
750 && $(MAKE) $(AM_MAKEFLAGS) dvi \
751 && $(MAKE) $(AM_MAKEFLAGS) check \
752 && $(MAKE) $(AM_MAKEFLAGS) install \
753 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
754 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
755 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
757 && chmod -R a-w "$$dc_install_base" \
759 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
760 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
761 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
762 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
763 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
764 } || { rm -rf "$$dc_destdir"; exit 1; }) \
765 && rm -rf "$$dc_destdir" \
766 && $(MAKE) $(AM_MAKEFLAGS) dist \
767 && rm -rf $(DIST_ARCHIVES) \
768 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
771 $(am__post_remove_distdir)
772 @(echo "$(distdir) archives ready for distribution: "; \
773 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
774 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
776 @test -n '$(distuninstallcheck_dir)' || { \
777 echo 'ERROR: trying to run $@ with an empty' \
778 '$$(distuninstallcheck_dir)' >&2; \
781 $(am__cd) '$(distuninstallcheck_dir)' || { \
782 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
785 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
786 || { echo "ERROR: files left after uninstall:" ; \
787 if test -n "$(DESTDIR)"; then \
788 echo " (check DESTDIR support)"; \
790 $(distuninstallcheck_listfiles) ; \
792 distcleancheck: distclean
793 @if test '$(srcdir)' = . ; then \
794 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
797 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
798 || { echo "ERROR: files left in build directory after distclean:" ; \
799 $(distcleancheck_listfiles) ; \
802 check: check-recursive
803 all-am: Makefile $(DATA) config.h
804 installdirs: installdirs-recursive
806 for dir in "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"; do \
807 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
809 install: install-recursive
810 install-exec: install-exec-recursive
811 install-data: install-data-recursive
812 uninstall: uninstall-recursive
815 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
817 installcheck: installcheck-recursive
819 if test -z '$(STRIP)'; then \
820 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
821 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
824 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
825 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
826 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
833 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
834 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
836 maintainer-clean-generic:
837 @echo "This command is intended for maintainers to use"
838 @echo "it deletes files that may require special tools to rebuild."
839 clean: clean-recursive
841 clean-am: clean-generic mostlyclean-am
843 distclean: distclean-recursive
844 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
846 distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
860 install-data-am: install-desktopDATA install-dist_docDATA
862 install-dvi: install-dvi-recursive
868 install-html: install-html-recursive
872 install-info: install-info-recursive
878 install-pdf: install-pdf-recursive
882 install-ps: install-ps-recursive
888 maintainer-clean: maintainer-clean-recursive
889 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
890 -rm -rf $(top_srcdir)/autom4te.cache
892 maintainer-clean-am: distclean-am maintainer-clean-generic
894 mostlyclean: mostlyclean-recursive
896 mostlyclean-am: mostlyclean-generic
906 uninstall-am: uninstall-desktopDATA uninstall-dist_docDATA
908 .MAKE: $(am__recursive_targets) all install-am install-strip
910 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
911 am--refresh check check-am clean clean-cscope clean-generic \
912 cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
913 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
914 distcheck distclean distclean-generic distclean-hdr \
915 distclean-tags distcleancheck distdir distuninstallcheck dvi \
916 dvi-am html html-am info info-am install install-am \
917 install-data install-data-am install-desktopDATA \
918 install-dist_docDATA install-dvi install-dvi-am install-exec \
919 install-exec-am install-html install-html-am install-info \
920 install-info-am install-man install-pdf install-pdf-am \
921 install-ps install-ps-am install-strip installcheck \
922 installcheck-am installdirs installdirs-am maintainer-clean \
923 maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
924 pdf-am ps ps-am tags tags-am uninstall uninstall-am \
925 uninstall-desktopDATA uninstall-dist_docDATA
928 @ASCIIDOC_TRUE@README.html: README www/style.css
929 @ASCIIDOC_TRUE@ asciidoc --theme style -a themedir=`pwd`/www -n -a toc README
931 @ASCIIDOC_TRUE@NEWS.html: NEWS www/style.css
932 @ASCIIDOC_TRUE@ asciidoc --theme style -a themedir=`pwd`/www NEWS
934 # Tell versions [3.59,3.63) of GNU make to not export all variables.
935 # Otherwise a system limit (for SysV at least) may be exceeded.