1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
24 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
25 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
27 for am__flg in $$MAKEFLAGS; do \
30 *n*) am__dry=yes; break;; \
34 test $$am__dry = yes; \
36 pkgdatadir = $(datadir)/@PACKAGE@
37 pkgincludedir = $(includedir)/@PACKAGE@
38 pkglibdir = $(libdir)/@PACKAGE@
39 pkglibexecdir = $(libexecdir)/@PACKAGE@
40 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
41 install_sh_DATA = $(install_sh) -c -m 644
42 install_sh_PROGRAM = $(install_sh) -c
43 install_sh_SCRIPT = $(install_sh) -c
44 INSTALL_HEADER = $(INSTALL_DATA)
45 transform = $(program_transform_name)
52 build_triplet = @build@
55 DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
56 $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
57 $(srcdir)/config.h.in $(top_srcdir)/configure ABOUT-NLS \
58 AUTHORS COPYING ChangeLog INSTALL NEWS compile config.guess \
59 config.rpath config.sub depcomp install-sh missing
60 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
61 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
62 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
64 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
65 configure.lineno config.status.lineno
66 mkinstalldirs = $(install_sh) -d
67 CONFIG_HEADER = config.h
69 CONFIG_CLEAN_VPATH_FILES =
72 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
73 html-recursive info-recursive install-data-recursive \
74 install-dvi-recursive install-exec-recursive \
75 install-html-recursive install-info-recursive \
76 install-pdf-recursive install-ps-recursive install-recursive \
77 installcheck-recursive installdirs-recursive pdf-recursive \
78 ps-recursive uninstall-recursive
79 am__can_run_installinfo = \
80 case $$AM_UPDATE_INFO_DIR in \
82 *) (install-info --version) >/dev/null 2>&1;; \
84 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
85 am__vpath_adj = case $$p in \
86 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
89 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
91 am__nobase_strip_setup = \
92 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
94 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
95 am__nobase_list = $(am__nobase_strip_setup); \
96 for p in $$list; do echo "$$p $$p"; done | \
97 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
98 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
99 if (++n[$$2] == $(am__install_max)) \
100 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
101 END { for (dir in files) print dir, files[dir] }'
103 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
104 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
105 am__uninstall_files_from_dir = { \
107 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
108 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
109 $(am__cd) "$$dir" && rm -f $$files; }; \
111 am__installdirs = "$(DESTDIR)$(autostartdir)" \
112 "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"
113 DATA = $(autostart_DATA) $(desktop_DATA) $(dist_doc_DATA)
114 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
115 distclean-recursive maintainer-clean-recursive
116 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
117 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
118 distdir dist dist-all distcheck
121 DIST_SUBDIRS = $(SUBDIRS)
122 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
123 distdir = $(PACKAGE)-$(VERSION)
124 top_distdir = $(distdir)
125 am__remove_distdir = \
126 if test -d "$(distdir)"; then \
127 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
128 && rm -rf "$(distdir)" \
129 || { sleep 5 && rm -rf "$(distdir)"; }; \
133 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
134 sed_rest='s,^[^/]*/*,,'; \
135 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
136 sed_butlast='s,/*[^/]*$$,,'; \
137 while test -n "$$dir1"; do \
138 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
139 if test "$$first" != "."; then \
140 if test "$$first" = ".."; then \
141 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
142 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
144 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
145 if test "$$first2" = "$$first"; then \
146 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
150 dir0="$$dir0"/"$$first"; \
153 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
156 DIST_ARCHIVES = $(distdir).tar.gz
158 distuninstallcheck_listfiles = find . -type f -print
159 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
160 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
161 distcleancheck_listfiles = find . -type f -print
164 APPINDICATOR_CFLAGS = @APPINDICATOR_CFLAGS@
165 APPINDICATOR_LIBS = @APPINDICATOR_LIBS@
166 ATASMART_CFLAGS = @ATASMART_CFLAGS@
167 ATASMART_LIBS = @ATASMART_LIBS@
168 AUTOCONF = @AUTOCONF@
169 AUTOHEADER = @AUTOHEADER@
170 AUTOMAKE = @AUTOMAKE@
173 CCDEPMODE = @CCDEPMODE@
176 CPPFLAGS = @CPPFLAGS@
177 CURL_CFLAGS = @CURL_CFLAGS@
178 CURL_LIBS = @CURL_LIBS@
179 CYGPATH_W = @CYGPATH_W@
187 GCONFTOOL = @GCONFTOOL@
188 GCONF_CFLAGS = @GCONF_CFLAGS@
189 GCONF_LIBS = @GCONF_LIBS@
190 GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
191 GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
192 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
194 GMSGFMT_015 = @GMSGFMT_015@
196 GTK_CFLAGS = @GTK_CFLAGS@
197 GTK_LIBS = @GTK_LIBS@
198 GTOP_CFLAGS = @GTOP_CFLAGS@
199 GTOP_LIBS = @GTOP_LIBS@
200 HAVE_CPPCHECK = @HAVE_CPPCHECK@
201 HELP2MAN = @HELP2MAN@
203 INSTALL_DATA = @INSTALL_DATA@
204 INSTALL_PROGRAM = @INSTALL_PROGRAM@
205 INSTALL_SCRIPT = @INSTALL_SCRIPT@
206 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
207 INTLLIBS = @INTLLIBS@
208 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
209 JSON_CFLAGS = @JSON_CFLAGS@
210 JSON_LIBS = @JSON_LIBS@
212 LIBATIADL_CFLAGS = @LIBATIADL_CFLAGS@
213 LIBATIADL_LIBS = @LIBATIADL_LIBS@
214 LIBICONV = @LIBICONV@
216 LIBMICROHTTPD_CFLAGS = @LIBMICROHTTPD_CFLAGS@
217 LIBMICROHTTPD_LIBS = @LIBMICROHTTPD_LIBS@
218 LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@
219 LIBNOTIFY_LIBS = @LIBNOTIFY_LIBS@
222 LTLIBICONV = @LTLIBICONV@
223 LTLIBINTL = @LTLIBINTL@
224 LTLIBOBJS = @LTLIBOBJS@
225 MAKEINFO = @MAKEINFO@
228 MSGFMT_015 = @MSGFMT_015@
229 MSGMERGE = @MSGMERGE@
230 NVIDIA_CFLAGS = @NVIDIA_CFLAGS@
231 NVIDIA_LIBS = @NVIDIA_LIBS@
234 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
235 PACKAGE_NAME = @PACKAGE_NAME@
236 PACKAGE_STRING = @PACKAGE_STRING@
237 PACKAGE_TARNAME = @PACKAGE_TARNAME@
238 PACKAGE_URL = @PACKAGE_URL@
239 PACKAGE_VERSION = @PACKAGE_VERSION@
240 PATH_SEPARATOR = @PATH_SEPARATOR@
241 PKG_CONFIG = @PKG_CONFIG@
242 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
243 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
245 PTHREAD_LIBS = @PTHREAD_LIBS@
247 SENSORS_LIBS = @SENSORS_LIBS@
248 SET_MAKE = @SET_MAKE@
251 UNITY_CFLAGS = @UNITY_CFLAGS@
252 UNITY_LIBS = @UNITY_LIBS@
255 X11_CFLAGS = @X11_CFLAGS@
256 X11_LIBS = @X11_LIBS@
257 XEXT_CFLAGS = @XEXT_CFLAGS@
258 XEXT_LIBS = @XEXT_LIBS@
259 XGETTEXT = @XGETTEXT@
260 XGETTEXT_015 = @XGETTEXT_015@
261 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
263 abs_builddir = @abs_builddir@
264 abs_srcdir = @abs_srcdir@
265 abs_top_builddir = @abs_top_builddir@
266 abs_top_srcdir = @abs_top_srcdir@
267 ac_ct_CC = @ac_ct_CC@
268 am__include = @am__include@
269 am__leading_dot = @am__leading_dot@
270 am__quote = @am__quote@
272 am__untar = @am__untar@
275 build_alias = @build_alias@
276 build_cpu = @build_cpu@
277 build_os = @build_os@
278 build_vendor = @build_vendor@
279 builddir = @builddir@
281 datarootdir = @datarootdir@
284 exec_prefix = @exec_prefix@
286 host_alias = @host_alias@
287 host_cpu = @host_cpu@
289 host_vendor = @host_vendor@
291 includedir = @includedir@
293 install_sh = @install_sh@
295 libexecdir = @libexecdir@
296 localedir = @localedir@
297 localstatedir = @localstatedir@
300 oldincludedir = @oldincludedir@
303 program_transform_name = @program_transform_name@
306 sharedstatedir = @sharedstatedir@
308 sysconfdir = @sysconfdir@
309 target_alias = @target_alias@
310 top_build_prefix = @top_build_prefix@
311 top_builddir = @top_builddir@
312 top_srcdir = @top_srcdir@
316 icons/hicolor/scalable \
317 icons/hicolor/14x14 \
318 icons/hicolor/16x16 \
319 icons/hicolor/22x22 \
320 icons/hicolor/24x24 \
321 icons/hicolor/32x32 \
322 icons/hicolor/48x48 \
323 icons/hicolor/64x64 \
324 icons/ubuntu-mono-dark/status/22 \
325 icons/ubuntu-mono-light/status/22 \
326 icons/ubuntu-mono-dark/apps/22 \
330 dist_doc_DATA = AUTHORS \
337 autostartdir = $(sysconfdir)/xdg/autostart
338 autostart_DATA = psensor.desktop
339 desktopdir = $(datadir)/applications
340 desktop_DATA = psensor.desktop
341 EXTRA_DIST = $(desktop_DATA) $(autostart_DATA)
343 $(MAKE) $(AM_MAKEFLAGS) all-recursive
346 am--refresh: Makefile
348 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
350 case '$(am__configure_deps)' in \
352 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
353 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
358 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
359 $(am__cd) $(top_srcdir) && \
360 $(AUTOMAKE) --gnu Makefile
362 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
365 echo ' $(SHELL) ./config.status'; \
366 $(SHELL) ./config.status;; \
368 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
369 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
372 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
373 $(SHELL) ./config.status --recheck
375 $(top_srcdir)/configure: $(am__configure_deps)
376 $(am__cd) $(srcdir) && $(AUTOCONF)
377 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
378 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
379 $(am__aclocal_m4_deps):
382 @if test ! -f $@; then rm -f stamp-h1; else :; fi
383 @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
385 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
387 cd $(top_builddir) && $(SHELL) ./config.status config.h
388 $(srcdir)/config.h.in: $(am__configure_deps)
389 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
394 -rm -f config.h stamp-h1
395 install-autostartDATA: $(autostart_DATA)
397 @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
398 if test -n "$$list"; then \
399 echo " $(MKDIR_P) '$(DESTDIR)$(autostartdir)'"; \
400 $(MKDIR_P) "$(DESTDIR)$(autostartdir)" || exit 1; \
402 for p in $$list; do \
403 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
405 done | $(am__base_list) | \
406 while read files; do \
407 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autostartdir)'"; \
408 $(INSTALL_DATA) $$files "$(DESTDIR)$(autostartdir)" || exit $$?; \
411 uninstall-autostartDATA:
413 @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
414 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
415 dir='$(DESTDIR)$(autostartdir)'; $(am__uninstall_files_from_dir)
416 install-desktopDATA: $(desktop_DATA)
418 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
419 if test -n "$$list"; then \
420 echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \
421 $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \
423 for p in $$list; do \
424 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
426 done | $(am__base_list) | \
427 while read files; do \
428 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \
429 $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \
432 uninstall-desktopDATA:
434 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
435 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
436 dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
437 install-dist_docDATA: $(dist_doc_DATA)
439 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
440 if test -n "$$list"; then \
441 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
442 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
444 for p in $$list; do \
445 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
447 done | $(am__base_list) | \
448 while read files; do \
449 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
450 $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
453 uninstall-dist_docDATA:
455 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
456 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
457 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
459 # This directory's subdirectories are mostly independent; you can cd
460 # into them and run `make' without going through this Makefile.
461 # To change the values of `make' variables: instead of editing Makefiles,
462 # (1) if the variable is set in `config.status', edit `config.status'
463 # (which will cause the Makefiles to be regenerated when you run `make');
464 # (2) otherwise, pass the desired values on the `make' command line.
465 $(RECURSIVE_TARGETS):
466 @fail= failcom='exit 1'; \
467 for f in x $$MAKEFLAGS; do \
470 *k*) failcom='fail=yes';; \
474 target=`echo $@ | sed s/-recursive//`; \
475 list='$(SUBDIRS)'; for subdir in $$list; do \
476 echo "Making $$target in $$subdir"; \
477 if test "$$subdir" = "."; then \
479 local_target="$$target-am"; \
481 local_target="$$target"; \
483 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
486 if test "$$dot_seen" = "no"; then \
487 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
490 $(RECURSIVE_CLEAN_TARGETS):
491 @fail= failcom='exit 1'; \
492 for f in x $$MAKEFLAGS; do \
495 *k*) failcom='fail=yes';; \
500 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
501 *) list='$(SUBDIRS)' ;; \
503 rev=''; for subdir in $$list; do \
504 if test "$$subdir" = "."; then :; else \
505 rev="$$subdir $$rev"; \
509 target=`echo $@ | sed s/-recursive//`; \
510 for subdir in $$rev; do \
511 echo "Making $$target in $$subdir"; \
512 if test "$$subdir" = "."; then \
513 local_target="$$target-am"; \
515 local_target="$$target"; \
517 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
519 done && test -z "$$fail"
521 list='$(SUBDIRS)'; for subdir in $$list; do \
522 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
525 list='$(SUBDIRS)'; for subdir in $$list; do \
526 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
529 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
530 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
531 unique=`for i in $$list; do \
532 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
534 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
535 END { if (nonempty) { for (i in files) print i; }; }'`; \
539 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
540 $(TAGS_FILES) $(LISP)
543 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
544 include_option=--etags-include; \
547 include_option=--include; \
550 list='$(SUBDIRS)'; for subdir in $$list; do \
551 if test "$$subdir" = .; then :; else \
552 test ! -f $$subdir/TAGS || \
553 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
556 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
557 unique=`for i in $$list; do \
558 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
560 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
561 END { if (nonempty) { for (i in files) print i; }; }'`; \
563 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
564 test -n "$$unique" || unique=$$empty_fix; \
565 if test $$# -gt 0; then \
566 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
569 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
574 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
575 $(TAGS_FILES) $(LISP)
576 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
577 unique=`for i in $$list; do \
578 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
580 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
581 END { if (nonempty) { for (i in files) print i; }; }'`; \
582 test -z "$(CTAGS_ARGS)$$unique" \
583 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
587 here=`$(am__cd) $(top_builddir) && pwd` \
588 && $(am__cd) $(top_srcdir) \
589 && gtags -i $(GTAGS_ARGS) "$$here"
592 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
594 distdir: $(DISTFILES)
595 $(am__remove_distdir)
596 test -d "$(distdir)" || mkdir "$(distdir)"
597 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
598 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
599 list='$(DISTFILES)'; \
600 dist_files=`for file in $$list; do echo $$file; done | \
601 sed -e "s|^$$srcdirstrip/||;t" \
602 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
603 case $$dist_files in \
604 */*) $(MKDIR_P) `echo "$$dist_files" | \
605 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
608 for file in $$dist_files; do \
609 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
610 if test -d $$d/$$file; then \
611 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
612 if test -d "$(distdir)/$$file"; then \
613 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
615 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
616 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
617 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
619 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
621 test -f "$(distdir)/$$file" \
622 || cp -p $$d/$$file "$(distdir)/$$file" \
626 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
627 if test "$$subdir" = .; then :; else \
629 || test -d "$(distdir)/$$subdir" \
630 || $(MKDIR_P) "$(distdir)/$$subdir" \
632 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
634 new_distdir=$$reldir; \
635 dir1=$$subdir; dir2="$(top_distdir)"; \
637 new_top_distdir=$$reldir; \
638 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
639 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
640 ($(am__cd) $$subdir && \
641 $(MAKE) $(AM_MAKEFLAGS) \
642 top_distdir="$$new_top_distdir" \
643 distdir="$$new_distdir" \
644 am__remove_distdir=: \
645 am__skip_length_check=: \
646 am__skip_mode_fix=: \
651 -test -n "$(am__skip_mode_fix)" \
652 || find "$(distdir)" -type d ! -perm -755 \
653 -exec chmod u+rwx,go+rx {} \; -o \
654 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
655 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
656 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
657 || chmod -R a+r "$(distdir)"
659 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
660 $(am__remove_distdir)
663 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
664 $(am__remove_distdir)
667 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
668 $(am__remove_distdir)
671 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
672 $(am__remove_distdir)
675 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
676 $(am__remove_distdir)
679 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
680 $(am__remove_distdir)
683 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
684 $(am__remove_distdir)
687 -rm -f $(distdir).zip
688 zip -rq $(distdir).zip $(distdir)
689 $(am__remove_distdir)
691 dist dist-all: distdir
692 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
693 $(am__remove_distdir)
695 # This target untars the dist file and tries a VPATH configuration. Then
696 # it guarantees that the distribution is self-contained by making another
699 case '$(DIST_ARCHIVES)' in \
701 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
703 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
705 lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
707 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
709 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
711 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
713 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
715 unzip $(distdir).zip ;;\
717 chmod -R a-w $(distdir); chmod u+w $(distdir)
718 mkdir $(distdir)/_build
719 mkdir $(distdir)/_inst
721 test -d $(distdir)/_build || exit 0; \
722 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
723 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
725 && $(am__cd) $(distdir)/_build \
726 && ../configure --srcdir=.. --prefix="$$dc_install_base" \
727 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
728 $(DISTCHECK_CONFIGURE_FLAGS) \
729 && $(MAKE) $(AM_MAKEFLAGS) \
730 && $(MAKE) $(AM_MAKEFLAGS) dvi \
731 && $(MAKE) $(AM_MAKEFLAGS) check \
732 && $(MAKE) $(AM_MAKEFLAGS) install \
733 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
734 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
735 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
737 && chmod -R a-w "$$dc_install_base" \
739 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
740 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
741 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
742 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
743 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
744 } || { rm -rf "$$dc_destdir"; exit 1; }) \
745 && rm -rf "$$dc_destdir" \
746 && $(MAKE) $(AM_MAKEFLAGS) dist \
747 && rm -rf $(DIST_ARCHIVES) \
748 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
751 $(am__remove_distdir)
752 @(echo "$(distdir) archives ready for distribution: "; \
753 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
754 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
756 @test -n '$(distuninstallcheck_dir)' || { \
757 echo 'ERROR: trying to run $@ with an empty' \
758 '$$(distuninstallcheck_dir)' >&2; \
761 $(am__cd) '$(distuninstallcheck_dir)' || { \
762 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
765 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
766 || { echo "ERROR: files left after uninstall:" ; \
767 if test -n "$(DESTDIR)"; then \
768 echo " (check DESTDIR support)"; \
770 $(distuninstallcheck_listfiles) ; \
772 distcleancheck: distclean
773 @if test '$(srcdir)' = . ; then \
774 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
777 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
778 || { echo "ERROR: files left in build directory after distclean:" ; \
779 $(distcleancheck_listfiles) ; \
782 check: check-recursive
783 all-am: Makefile $(DATA) config.h
784 installdirs: installdirs-recursive
786 for dir in "$(DESTDIR)$(autostartdir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"; do \
787 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
789 install: install-recursive
790 install-exec: install-exec-recursive
791 install-data: install-data-recursive
792 uninstall: uninstall-recursive
795 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
797 installcheck: installcheck-recursive
799 if test -z '$(STRIP)'; then \
800 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
801 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
804 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
805 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
806 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
813 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
814 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
816 maintainer-clean-generic:
817 @echo "This command is intended for maintainers to use"
818 @echo "it deletes files that may require special tools to rebuild."
819 clean: clean-recursive
821 clean-am: clean-generic mostlyclean-am
823 distclean: distclean-recursive
824 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
826 distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
840 install-data-am: install-autostartDATA install-desktopDATA \
843 install-dvi: install-dvi-recursive
849 install-html: install-html-recursive
853 install-info: install-info-recursive
859 install-pdf: install-pdf-recursive
863 install-ps: install-ps-recursive
869 maintainer-clean: maintainer-clean-recursive
870 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
871 -rm -rf $(top_srcdir)/autom4te.cache
873 maintainer-clean-am: distclean-am maintainer-clean-generic
875 mostlyclean: mostlyclean-recursive
877 mostlyclean-am: mostlyclean-generic
887 uninstall-am: uninstall-autostartDATA uninstall-desktopDATA \
888 uninstall-dist_docDATA
890 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
891 ctags-recursive install-am install-strip tags-recursive
893 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
894 all all-am am--refresh check check-am clean clean-generic \
895 ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
896 dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
897 distcheck distclean distclean-generic distclean-hdr \
898 distclean-tags distcleancheck distdir distuninstallcheck dvi \
899 dvi-am html html-am info info-am install install-am \
900 install-autostartDATA install-data install-data-am \
901 install-desktopDATA install-dist_docDATA install-dvi \
902 install-dvi-am install-exec install-exec-am install-html \
903 install-html-am install-info install-info-am install-man \
904 install-pdf install-pdf-am install-ps install-ps-am \
905 install-strip installcheck installcheck-am installdirs \
906 installdirs-am maintainer-clean maintainer-clean-generic \
907 mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
908 tags-recursive uninstall uninstall-am uninstall-autostartDATA \
909 uninstall-desktopDATA uninstall-dist_docDATA
912 README.html: README www/style.css
913 asciidoc --theme style -a themedir=`pwd`/www -n -a toc README
915 # Tell versions [3.59,3.63) of GNU make to not export all variables.
916 # Otherwise a system limit (for SysV at least) may be exceeded.