#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for psensor 0.6.2.17.
+# Generated by GNU Autoconf 2.69 for psensor 0.8.0.6.
#
# Report bugs to <jeanfi@gmail.com>.
#
#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
else
exitcode=1; echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- # Preserve -v and -x to the replacement shell.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
- esac
- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
fi
if test x$as_have_required = xno; then :
} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Identity of this package.
PACKAGE_NAME='psensor'
PACKAGE_TARNAME='psensor'
-PACKAGE_VERSION='0.6.2.17'
-PACKAGE_STRING='psensor 0.6.2.17'
+PACKAGE_VERSION='0.8.0.6'
+PACKAGE_STRING='psensor 0.8.0.6'
PACKAGE_BUGREPORT='jeanfi@gmail.com'
PACKAGE_URL='http://wpitchoune.net/psensor'
-ac_unique_file="src/compat.h"
+ac_unique_file="src/ui.c"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
ac_subst_vars='am__EXEEXT_FALSE
am__EXEEXT_TRUE
LTLIBOBJS
+CPPCHECK_FALSE
+CPPCHECK_TRUE
+HAVE_CPPCHECK
HELP2MAN
GTOP_FALSE
GTOP_TRUE
LIBNOTIFY_TRUE
LIBNOTIFY_LIBS
LIBNOTIFY_CFLAGS
+ATASMART_FALSE
+ATASMART_TRUE
+ATASMART_LIBS
+ATASMART_CFLAGS
+GCONF_FALSE
+GCONF_TRUE
GCONF_LIBS
GCONF_CFLAGS
GTK_FALSE
GTK_TRUE
GTK_LIBS
GTK_CFLAGS
+XEXT_FALSE
+XEXT_TRUE
XEXT_LIBS
XEXT_CFLAGS
+X11_FALSE
+X11_TRUE
X11_LIBS
X11_CFLAGS
PKG_CONFIG_LIBDIR
PKG_CONFIG_PATH
PKG_CONFIG
SENSORS_LIBS
+PTHREAD_LIBS
+GCONF_SCHEMAS_INSTALL_FALSE
+GCONF_SCHEMAS_INSTALL_TRUE
+GCONF_SCHEMA_FILE_DIR
+GCONF_SCHEMA_CONFIG_SOURCE
+GCONFTOOL
POSUB
LTLIBINTL
LIBINTL
GREP
CPP
XMKMF
+ac_ct_AR
+AR
RANLIB
am__fastdepCC_FALSE
am__fastdepCC_TRUE
CCDEPMODE
+am__nodep
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
ac_user_opts='
enable_option_checking
enable_dependency_tracking
+enable_largefile
with_x
enable_nls
with_gnu_ld
enable_rpath
with_libiconv_prefix
with_libintl_prefix
+with_gconf_source
+with_gconf_schema_file_dir
+enable_schemas_install
with_libatiadl
with_gtop
'
GTK_LIBS
GCONF_CFLAGS
GCONF_LIBS
+ATASMART_CFLAGS
+ATASMART_LIBS
LIBNOTIFY_CFLAGS
LIBNOTIFY_LIBS
APPINDICATOR_CFLAGS
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures psensor 0.6.2.17 to adapt to many kinds of systems.
+\`configure' configures psensor 0.8.0.6 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of psensor 0.6.2.17:";;
+ short | recursive ) echo "Configuration of psensor 0.8.0.6:";;
esac
cat <<\_ACEOF
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
+ --disable-largefile omit support for large files
--disable-nls do not use Native Language Support
--disable-rpath do not hardcode runtime library paths
+ --disable-schemas-install
+ Disable the schemas installation
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-libiconv-prefix don't search for libiconv in includedir and libdir
--with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
--without-libintl-prefix don't search for libintl in includedir and libdir
+ --with-gconf-source=sourceaddress
+ Config database for installing schema files.
+ --with-gconf-schema-file-dir=dir
+ Directory for installing schema files.
--with-libatiadl=DIR use libatiadlxx in DIR
--with-gtop=yes|no use gtop
GCONF_CFLAGS
C compiler flags for GCONF, overriding pkg-config
GCONF_LIBS linker flags for GCONF, overriding pkg-config
+ ATASMART_CFLAGS
+ C compiler flags for ATASMART, overriding pkg-config
+ ATASMART_LIBS
+ linker flags for ATASMART, overriding pkg-config
LIBNOTIFY_CFLAGS
C compiler flags for LIBNOTIFY, overriding pkg-config
LIBNOTIFY_LIBS
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-psensor configure 0.6.2.17
-generated by GNU Autoconf 2.68
+psensor configure 0.8.0.6
+generated by GNU Autoconf 2.69
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
test ! -s conftest.err
} && test -s conftest$ac_exeext && {
test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
+ test -x conftest$ac_exeext
}; then :
ac_retval=0
else
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by psensor $as_me 0.6.2.17, which was
-generated by GNU Autoconf 2.68. Invocation command line was
+It was created by psensor $as_me 0.8.0.6, which was
+generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
test -z "$as_dir" && as_dir=.
for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
'mkdir (GNU coreutils) '* | \
'mkdir (coreutils) '* | \
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
# Define the identity of the package.
PACKAGE='psensor'
- VERSION='0.6.2.17'
+ VERSION='0.8.0.6'
cat >>confdefs.h <<_ACEOF
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
ac_config_headers="$ac_config_headers config.h"
+# m4
+
+
# Checks for programs.
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
+ am__nodep='_no'
fi
if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
+ rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
break
fi
;;
- msvisualcpp | msvcmsys)
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok `-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ if ac_fn_c_try_compile "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ fi
+
+
+fi
+
+
# Checks lib build
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
RANLIB="$ac_cv_prog_RANLIB"
fi
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar lib "link -lib"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar lib "link -lib"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
+$as_echo_n "checking the archiver ($AR) interface... " >&6; }
+if ${am_cv_ar_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ am_cv_ar_interface=ar
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int some_variable = 0;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+ (eval $am_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ am_cv_ar_interface=ar
+ else
+ am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+ (eval $am_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ am_cv_ar_interface=lib
+ else
+ am_cv_ar_interface=unknown
+ fi
+ fi
+ rm -f conftest.lib libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
+$as_echo "$am_cv_ar_interface" >&6; }
+
+case $am_cv_ar_interface in
+ar)
+ ;;
+lib)
+ # Microsoft lib, so override with the ar-lib wrapper script.
+ # FIXME: It is wrong to rewrite AR.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__AR in this case,
+ # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+ # similar.
+ AR="$am_aux_dir/ar-lib $AR"
+ ;;
+unknown)
+ as_fn_error $? "could not determine $AR interface" "$LINENO" 5
+ ;;
+esac
-# Checks for header files.
+# Checks for header files.
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+ as_fn_executable_p "$ac_path_GREP" || continue
# Check for GNU ac_path_GREP and select it if it is found.
# Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+ as_fn_executable_p "$ac_path_EGREP" || continue
# Check for GNU ac_path_EGREP and select it if it is found.
# Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
done
-for ac_header in arpa/inet.h netinet/in.h stdint.h stdlib.h string.h sys/socket.h sys/time.h unistd.h getopt.h
+for ac_header in stdbool.h
do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ ac_fn_c_check_header_mongrel "$LINENO" "stdbool.h" "ac_cv_header_stdbool_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdbool_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_STDBOOL_H 1
_ACEOF
fi
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
-############### common
-
-# Checks sensors, required by psensor and psensor-server
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sensors_init in -lsensors" >&5
-$as_echo_n "checking for sensors_init in -lsensors... " >&6; }
-if ${ac_cv_lib_sensors_sensors_init+:} false; then :
+# Gconf
+# Extract the first word of "gconftool-2", so it can be a program name with args.
+set dummy gconftool-2; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GCONFTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsensors $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char sensors_init ();
-int
-main ()
-{
-return sensors_init ();
- ;
+ case $GCONFTOOL in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_path_GCONFTOOL" && ac_cv_path_GCONFTOOL="no"
+ ;;
+esac
+fi
+GCONFTOOL=$ac_cv_path_GCONFTOOL
+if test -n "$GCONFTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCONFTOOL" >&5
+$as_echo "$GCONFTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then
+ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source`
+ else
+ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE
+ fi
+
+
+# Check whether --with-gconf-source was given.
+if test "${with_gconf_source+set}" = set; then :
+ withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval"
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5
+$as_echo "Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; }
+
+ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then
+ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas'
+ fi
+
+
+# Check whether --with-gconf-schema-file-dir was given.
+if test "${with_gconf_schema_file_dir+set}" = set; then :
+ withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval"
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5
+$as_echo "Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; }
+
+ # Check whether --enable-schemas-install was given.
+if test "${enable_schemas_install+set}" = set; then :
+ enableval=$enable_schemas_install; case ${enableval} in
+ yes|no) ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-schemas-install" "$LINENO" 5 ;;
+ esac
+fi
+
+ if test "$enable_schemas_install" != no; then
+ GCONF_SCHEMAS_INSTALL_TRUE=
+ GCONF_SCHEMAS_INSTALL_FALSE='#'
+else
+ GCONF_SCHEMAS_INSTALL_TRUE='#'
+ GCONF_SCHEMAS_INSTALL_FALSE=
+fi
+
+
+
+############### common
+
+# Checks pthread
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lpthread" >&5
+$as_echo_n "checking for pthread_create in -lpthread... " >&6; }
+if ${ac_cv_lib_pthread_pthread_create+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpthread $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_create ();
+int
+main ()
+{
+return pthread_create ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_pthread_pthread_create=yes
+else
+ ac_cv_lib_pthread_pthread_create=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_create" >&5
+$as_echo "$ac_cv_lib_pthread_pthread_create" >&6; }
+if test "x$ac_cv_lib_pthread_pthread_create" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBPTHREAD 1
+_ACEOF
+
+ LIBS="-lpthread $LIBS"
+
+fi
+
+PTHREAD_LIBS=-pthread
+
+
+# Checks sensors, required by psensor and psensor-server
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sensors_init in -lsensors" >&5
+$as_echo_n "checking for sensors_init in -lsensors... " >&6; }
+if ${ac_cv_lib_sensors_sensors_init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsensors $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char sensors_init ();
+int
+main ()
+{
+return sensors_init ();
+ ;
return 0;
}
_ACEOF
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
# Put the nasty error message in config.log where it belongs
echo "$X11_PKG_ERRORS" >&5
- as_fn_error $? "Package requirements (x11) were not met:
-
-$X11_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables X11_CFLAGS
-and X11_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"x11 missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"x11 missing psensor will not be built\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables X11_CFLAGS
-and X11_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"x11 missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"x11 missing psensor will not be built\"" >&2;}
else
X11_CFLAGS=$pkg_cv_X11_CFLAGS
X11_LIBS=$pkg_cv_X11_LIBS
$as_echo "yes" >&6; }
fi
+ if test -n "$X11_LIBS"; then
+ X11_TRUE=
+ X11_FALSE='#'
+else
+ X11_TRUE='#'
+ X11_FALSE=
+fi
+
# Put the nasty error message in config.log where it belongs
echo "$XEXT_PKG_ERRORS" >&5
- as_fn_error $? "Package requirements (xext) were not met:
-
-$XEXT_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XEXT_CFLAGS
-and XEXT_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"xext missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"xext missing psensor will not be built\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XEXT_CFLAGS
-and XEXT_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"xext missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"xext missing psensor will not be built\"" >&2;}
else
XEXT_CFLAGS=$pkg_cv_XEXT_CFLAGS
XEXT_LIBS=$pkg_cv_XEXT_LIBS
$as_echo "yes" >&6; }
fi
+ if test -n "$XEXT_LIBS"; then
+ XEXT_TRUE=
+ XEXT_FALSE='#'
+else
+ XEXT_TRUE='#'
+ XEXT_FALSE=
+fi
+
-# Checks GTK
-GTK_LIBS=
+# Checks GTK+ 3.0
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5
# Put the nasty error message in config.log where it belongs
echo "$GTK_PKG_ERRORS" >&5
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"GTK+ 3 not present\"" >&5
-$as_echo "$as_me: WARNING: \"GTK+ 3 not present\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"gtk missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"gtk missing psensor will not be built\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"GTK+ 3 not present\"" >&5
-$as_echo "$as_me: WARNING: \"GTK+ 3 not present\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"gtk missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"gtk missing psensor will not be built\"" >&2;}
else
GTK_CFLAGS=$pkg_cv_GTK_CFLAGS
GTK_LIBS=$pkg_cv_GTK_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
-$as_echo "#define HAVE_GTK3 1" >>confdefs.h
-
fi
if test -n "$GTK_LIBS"; then
GTK_TRUE=
GTK_FALSE=
fi
+# ensure that only allowed headers are included
+GTK_CFLAGS+=" -DGTK_DISABLE_SINGLE_INCLUDES "
+# ensure that no gtk deprecated symbols are used
+GTK_CFLAGS+=" -DGDK_DISABLE_DEPRECATED "
+GTK_CFLAGS+=" -DGTK_DISABLE_DEPRECATED "
+# ensure use of accessors
+GTK_CFLAGS+=" -DGSEAL_ENABLE "
-if test "$GTK_LIBS" == ""; then
+# Check GCONF
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5
-$as_echo_n "checking for GTK... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GCONF" >&5
+$as_echo_n "checking for GCONF... " >&6; }
-if test -n "$GTK_CFLAGS"; then
- pkg_cv_GTK_CFLAGS="$GTK_CFLAGS"
+if test -n "$GCONF_CFLAGS"; then
+ pkg_cv_GCONF_CFLAGS="$GCONF_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.18\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= 2.18") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= 2.18" 2>/dev/null`
+ pkg_cv_GCONF_CFLAGS=`$PKG_CONFIG --cflags "gconf-2.0" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
else
pkg_failed=untried
fi
-if test -n "$GTK_LIBS"; then
- pkg_cv_GTK_LIBS="$GTK_LIBS"
+if test -n "$GCONF_LIBS"; then
+ pkg_cv_GCONF_LIBS="$GCONF_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.18\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= 2.18") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= 2.18" 2>/dev/null`
+ pkg_cv_GCONF_LIBS=`$PKG_CONFIG --libs "gconf-2.0" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-2.0 >= 2.18" 2>&1`
+ GCONF_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gconf-2.0" 2>&1`
else
- GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-2.0 >= 2.18" 2>&1`
+ GCONF_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gconf-2.0" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
- echo "$GTK_PKG_ERRORS" >&5
-
- as_fn_error $? "Package requirements (gtk+-2.0 >= 2.18) were not met:
-
-$GTK_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
+ echo "$GCONF_PKG_ERRORS" >&5
-Alternatively, you may set the environment variables GTK_CFLAGS
-and GTK_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"gconf2 missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"gconf2 missing psensor will not be built\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GTK_CFLAGS
-and GTK_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"gconf2 missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"gconf2 missing psensor will not be built\"" >&2;}
else
- GTK_CFLAGS=$pkg_cv_GTK_CFLAGS
- GTK_LIBS=$pkg_cv_GTK_LIBS
+ GCONF_CFLAGS=$pkg_cv_GCONF_CFLAGS
+ GCONF_LIBS=$pkg_cv_GCONF_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+$as_echo "#define HAVE_GCONF2 1" >>confdefs.h
+
fi
- if test -n "$GTK_LIBS"; then
- GTK_TRUE=
- GTK_FALSE='#'
+ if test -n "$GCONF_LIBS"; then
+ GCONF_TRUE=
+ GCONF_FALSE='#'
else
- GTK_TRUE='#'
- GTK_FALSE=
+ GCONF_TRUE='#'
+ GCONF_FALSE=
fi
-fi
-# Check GCONF
+### Optional
+
+# check libatasmart
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GCONF" >&5
-$as_echo_n "checking for GCONF... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ATASMART" >&5
+$as_echo_n "checking for ATASMART... " >&6; }
-if test -n "$GCONF_CFLAGS"; then
- pkg_cv_GCONF_CFLAGS="$GCONF_CFLAGS"
+if test -n "$ATASMART_CFLAGS"; then
+ pkg_cv_ATASMART_CFLAGS="$ATASMART_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libatasmart\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libatasmart") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GCONF_CFLAGS=`$PKG_CONFIG --cflags "gconf-2.0" 2>/dev/null`
+ pkg_cv_ATASMART_CFLAGS=`$PKG_CONFIG --cflags "libatasmart" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
else
pkg_failed=untried
fi
-if test -n "$GCONF_LIBS"; then
- pkg_cv_GCONF_LIBS="$GCONF_LIBS"
+if test -n "$ATASMART_LIBS"; then
+ pkg_cv_ATASMART_LIBS="$ATASMART_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libatasmart\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libatasmart") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GCONF_LIBS=`$PKG_CONFIG --libs "gconf-2.0" 2>/dev/null`
+ pkg_cv_ATASMART_LIBS=`$PKG_CONFIG --libs "libatasmart" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- GCONF_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gconf-2.0" 2>&1`
+ ATASMART_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libatasmart" 2>&1`
else
- GCONF_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gconf-2.0" 2>&1`
+ ATASMART_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libatasmart" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
- echo "$GCONF_PKG_ERRORS" >&5
-
- as_fn_error $? "Package requirements (gconf-2.0) were not met:
-
-$GCONF_PKG_ERRORS
+ echo "$ATASMART_PKG_ERRORS" >&5
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables GCONF_CFLAGS
-and GCONF_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Library atasmart not present\"" >&5
+$as_echo "$as_me: WARNING: \"Library atasmart not present\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GCONF_CFLAGS
-and GCONF_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Library atasmart not present\"" >&5
+$as_echo "$as_me: WARNING: \"Library atasmart not present\"" >&2;}
else
- GCONF_CFLAGS=$pkg_cv_GCONF_CFLAGS
- GCONF_LIBS=$pkg_cv_GCONF_LIBS
+ ATASMART_CFLAGS=$pkg_cv_ATASMART_CFLAGS
+ ATASMART_LIBS=$pkg_cv_ATASMART_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+$as_echo "#define HAVE_ATASMART 1" >>confdefs.h
+
+fi
+
+ if test -n "$ATASMART_LIBS"; then
+ ATASMART_TRUE=
+ ATASMART_FALSE='#'
+else
+ ATASMART_TRUE='#'
+ ATASMART_FALSE=
fi
-### Optional
# Check libnotify
LIBNOTIFY_LIBS=
pkg_cv_JSON_CFLAGS="$JSON_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json-c\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "json-c") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_JSON_CFLAGS=`$PKG_CONFIG --cflags "json-c" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$JSON_LIBS"; then
+ pkg_cv_JSON_LIBS="$JSON_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json-c\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "json-c") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_JSON_LIBS=`$PKG_CONFIG --libs "json-c" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ JSON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "json-c" 2>&1`
+ else
+ JSON_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "json-c" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$JSON_PKG_ERRORS" >&5
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json-c missing\"" >&5
+$as_echo "$as_me: WARNING: \"json-c missing\"" >&2;}
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json-c missing\"" >&5
+$as_echo "$as_me: WARNING: \"json-c missing\"" >&2;}
+else
+ JSON_CFLAGS=$pkg_cv_JSON_CFLAGS
+ JSON_LIBS=$pkg_cv_JSON_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define HAVE_JSON 1" >>confdefs.h
+
+fi
+
+if test "$JSON_LIBS" == ""; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for JSON" >&5
+$as_echo_n "checking for JSON... " >&6; }
+
+if test -n "$JSON_CFLAGS"; then
+ pkg_cv_JSON_CFLAGS="$JSON_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json\""; } >&5
($PKG_CONFIG --exists --print-errors "json") 2>&5
ac_status=$?
# Put the nasty error message in config.log where it belongs
echo "$JSON_PKG_ERRORS" >&5
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Remote monitoring disabled" >&5
-$as_echo "$as_me: WARNING: \"Remote monitoring disabled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json0 missing\"" >&5
+$as_echo "$as_me: WARNING: \"json0 missing\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Remote monitoring disabled" >&5
-$as_echo "$as_me: WARNING: \"Remote monitoring disabled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json0 missing\"" >&5
+$as_echo "$as_me: WARNING: \"json0 missing\"" >&2;}
else
JSON_CFLAGS=$pkg_cv_JSON_CFLAGS
JSON_LIBS=$pkg_cv_JSON_LIBS
$as_echo "#define HAVE_JSON 1" >>confdefs.h
+
+$as_echo "#define HAVE_JSON_0 1" >>confdefs.h
+
+fi
fi
+
if test -n "$JSON_LIBS"; then
JSON_TRUE=
JSON_FALSE='#'
-ac_config_files="$ac_config_files Makefile src/Makefile src/glade/Makefile src/lib/Makefile src/server/Makefile icons/hicolor/scalable/Makefile icons/hicolor/14x14/Makefile icons/hicolor/16x16/Makefile icons/hicolor/22x22/Makefile icons/hicolor/24x24/Makefile icons/hicolor/32x32/Makefile icons/hicolor/48x48/Makefile icons/hicolor/64x64/Makefile icons/ubuntu-mono-dark/status/22/Makefile icons/ubuntu-mono-light/status/22/Makefile icons/ubuntu-mono-dark/apps/22/Makefile www/Makefile po/Makefile.in tests/Makefile"
+ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile src/glade/Makefile src/lib/Makefile src/server/Makefile icons/hicolor/scalable/Makefile icons/hicolor/14x14/Makefile icons/hicolor/16x16/Makefile icons/hicolor/22x22/Makefile icons/hicolor/24x24/Makefile icons/hicolor/32x32/Makefile icons/hicolor/48x48/Makefile icons/hicolor/64x64/Makefile icons/ubuntu-mono-dark/status/22/Makefile icons/ubuntu-mono-light/status/22/Makefile icons/ubuntu-mono-dark/apps/22/Makefile www/Makefile po/Makefile.in tests/Makefile"
for ac_prog in help2man
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_HELP2MAN="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
done
+# Extract the first word of "cppcheck", so it can be a program name with args.
+set dummy cppcheck; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_HAVE_CPPCHECK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$HAVE_CPPCHECK"; then
+ ac_cv_prog_HAVE_CPPCHECK="$HAVE_CPPCHECK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_HAVE_CPPCHECK="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+HAVE_CPPCHECK=$ac_cv_prog_HAVE_CPPCHECK
+if test -n "$HAVE_CPPCHECK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_CPPCHECK" >&5
+$as_echo "$HAVE_CPPCHECK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test -n "$HAVE_CPPCHECK"; then
+ CPPCHECK_TRUE=
+ CPPCHECK_FALSE='#'
+else
+ CPPCHECK_TRUE='#'
+ CPPCHECK_FALSE=
+fi
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-if test -z "${GTK_TRUE}" && test -z "${GTK_FALSE}"; then
- as_fn_error $? "conditional \"GTK\" was never defined.
+if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then
+ as_fn_error $? "conditional \"GCONF_SCHEMAS_INSTALL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${X11_TRUE}" && test -z "${X11_FALSE}"; then
+ as_fn_error $? "conditional \"X11\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${XEXT_TRUE}" && test -z "${XEXT_FALSE}"; then
+ as_fn_error $? "conditional \"XEXT\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${GTK_TRUE}" && test -z "${GTK_FALSE}"; then
as_fn_error $? "conditional \"GTK\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${GCONF_TRUE}" && test -z "${GCONF_FALSE}"; then
+ as_fn_error $? "conditional \"GCONF\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ATASMART_TRUE}" && test -z "${ATASMART_FALSE}"; then
+ as_fn_error $? "conditional \"ATASMART\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
if test -z "${LIBNOTIFY_TRUE}" && test -z "${LIBNOTIFY_FALSE}"; then
as_fn_error $? "conditional \"LIBNOTIFY\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
as_fn_error $? "conditional \"GTOP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${CPPCHECK_TRUE}" && test -z "${CPPCHECK_FALSE}"; then
+ as_fn_error $? "conditional \"CPPCHECK\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by psensor $as_me 0.6.2.17, which was
-generated by GNU Autoconf 2.68. Invocation command line was
+This file was extended by psensor $as_me 0.8.0.6, which was
+generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-psensor config.status 0.6.2.17
-configured by $0, generated by GNU Autoconf 2.68,
+psensor config.status 0.8.0.6
+configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
"src/glade/Makefile") CONFIG_FILES="$CONFIG_FILES src/glade/Makefile" ;;
"src/lib/Makefile") CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
projects / psensor-pkg-debian.git / blobdiff