1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
2 # Makefile. Generated from Makefile.in by configure.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
24 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
25 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
27 for am__flg in $$MAKEFLAGS; do \
30 *n*) am__dry=yes; break;; \
34 test $$am__dry = yes; \
36 pkgdatadir = $(datadir)/prss
37 pkgincludedir = $(includedir)/prss
38 pkglibdir = $(libdir)/prss
39 pkglibexecdir = $(libexecdir)/prss
40 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
41 install_sh_DATA = $(install_sh) -c -m 644
42 install_sh_PROGRAM = $(install_sh) -c
43 install_sh_SCRIPT = $(install_sh) -c
44 INSTALL_HEADER = $(INSTALL_DATA)
45 transform = $(program_transform_name)
52 build_triplet = x86_64-unknown-linux-gnu
53 host_triplet = x86_64-unknown-linux-gnu
55 DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
56 $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
57 $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
58 INSTALL NEWS compile config.guess config.rpath config.sub \
59 depcomp install-sh missing
60 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
61 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
62 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
64 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
65 configure.lineno config.status.lineno
66 mkinstalldirs = $(install_sh) -d
68 CONFIG_CLEAN_VPATH_FILES =
71 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
72 html-recursive info-recursive install-data-recursive \
73 install-dvi-recursive install-exec-recursive \
74 install-html-recursive install-info-recursive \
75 install-pdf-recursive install-ps-recursive install-recursive \
76 installcheck-recursive installdirs-recursive pdf-recursive \
77 ps-recursive uninstall-recursive
78 am__can_run_installinfo = \
79 case $$AM_UPDATE_INFO_DIR in \
81 *) (install-info --version) >/dev/null 2>&1;; \
83 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
84 am__vpath_adj = case $$p in \
85 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
88 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
90 am__nobase_strip_setup = \
91 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
93 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
94 am__nobase_list = $(am__nobase_strip_setup); \
95 for p in $$list; do echo "$$p $$p"; done | \
96 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
97 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
98 if (++n[$$2] == $(am__install_max)) \
99 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
100 END { for (dir in files) print dir, files[dir] }'
102 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
103 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
104 am__uninstall_files_from_dir = { \
106 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
107 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
108 $(am__cd) "$$dir" && rm -f $$files; }; \
110 am__installdirs = "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"
111 DATA = $(desktop_DATA) $(dist_doc_DATA)
112 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
113 distclean-recursive maintainer-clean-recursive
114 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
115 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
116 distdir dist dist-all distcheck
119 DIST_SUBDIRS = $(SUBDIRS)
120 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
121 distdir = $(PACKAGE)-$(VERSION)
122 top_distdir = $(distdir)
123 am__remove_distdir = \
124 if test -d "$(distdir)"; then \
125 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
126 && rm -rf "$(distdir)" \
127 || { sleep 5 && rm -rf "$(distdir)"; }; \
131 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
132 sed_rest='s,^[^/]*/*,,'; \
133 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
134 sed_butlast='s,/*[^/]*$$,,'; \
135 while test -n "$$dir1"; do \
136 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
137 if test "$$first" != "."; then \
138 if test "$$first" = ".."; then \
139 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
140 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
142 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
143 if test "$$first2" = "$$first"; then \
144 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
148 dir0="$$dir0"/"$$first"; \
151 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
154 DIST_ARCHIVES = $(distdir).tar.gz
156 distuninstallcheck_listfiles = find . -type f -print
157 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
158 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
159 distcleancheck_listfiles = find . -type f -print
160 ACLOCAL = ${SHELL} /home/jporsini/work/wpitchoune/svnpub/prss/trunk/missing --run aclocal-1.11
162 AUTOCONF = ${SHELL} /home/jporsini/work/wpitchoune/svnpub/prss/trunk/missing --run autoconf
163 AUTOHEADER = ${SHELL} /home/jporsini/work/wpitchoune/svnpub/prss/trunk/missing --run autoheader
164 AUTOMAKE = ${SHELL} /home/jporsini/work/wpitchoune/svnpub/prss/trunk/missing --run automake-1.11
167 CCDEPMODE = depmode=gcc3
174 DEFS = -DPACKAGE_NAME=\"prss\" -DPACKAGE_TARNAME=\"prss\" -DPACKAGE_VERSION=\"0.0.x\" -DPACKAGE_STRING=\"prss\ 0.0.x\" -DPACKAGE_BUGREPORT=\"jeanfi@gmail.com\" -DPACKAGE_URL=\"http://wpitchoune.net/prss\" -DPACKAGE=\"prss\" -DVERSION=\"0.0.x\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DHAVE_LIBPTHREAD=1
181 GETTEXT_MACRO_VERSION = 0.18
182 GLIB_COMPILE_SCHEMAS = /usr/lib/x86_64-linux-gnu/glib-2.0/glib-compile-schemas
183 GMSGFMT = /usr/bin/msgfmt
184 GMSGFMT_015 = /usr/bin/msgfmt
186 GSETTINGS_DISABLE_SCHEMAS_COMPILE =
187 GTK_CFLAGS = -pthread -I/usr/include/gtk-3.0 -I/usr/include/atk-1.0 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/libpng12 -DGTK_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGSEAL_ENABLE
188 GTK_LIBS = -lgtk-3 -lgdk-3 -latk-1.0 -lgio-2.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo-gobject -lpango-1.0 -lcairo -lgobject-2.0 -lglib-2.0
191 INSTALL = /usr/bin/install -c
192 INSTALL_DATA = ${INSTALL} -m 644
193 INSTALL_PROGRAM = ${INSTALL}
194 INSTALL_SCRIPT = ${INSTALL}
195 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
198 JSON_CFLAGS = -I/usr/include/json
208 MAKEINFO = ${SHELL} /home/jporsini/work/wpitchoune/svnpub/prss/trunk/missing --run makeinfo
209 MKDIR_P = /bin/mkdir -p
210 MSGFMT = /usr/bin/msgfmt
211 MSGFMT_015 = /usr/bin/msgfmt
212 MSGMERGE = /usr/bin/msgmerge
215 PACKAGE_BUGREPORT = jeanfi@gmail.com
217 PACKAGE_STRING = prss 0.0.x
218 PACKAGE_TARNAME = prss
219 PACKAGE_URL = http://wpitchoune.net/prss
220 PACKAGE_VERSION = 0.0.x
222 PKG_CONFIG = /usr/bin/pkg-config
226 PTHREAD_LIBS = -pthread
232 WEBKIT_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/gtk-3.0 -I/usr/include/libsoup-2.4 -I/usr/include/atk-1.0 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/pixman-1 -I/usr/include/libpng12 -I/usr/include/libxml2 -I/usr/include/webkitgtk-3.0
233 WEBKIT_LIBS = -lwebkitgtk-3.0 -lgtk-3 -lsoup-2.4 -ljavascriptcoregtk-3.0 -lgdk-3 -latk-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo-gobject -lpango-1.0 -lcairo -lgio-2.0 -lgobject-2.0 -lglib-2.0
238 XGETTEXT = /usr/bin/xgettext
239 XGETTEXT_015 = /usr/bin/xgettext
240 XGETTEXT_EXTRA_OPTIONS =
242 abs_builddir = /home/jporsini/work/wpitchoune/svnpub/prss/trunk
243 abs_srcdir = /home/jporsini/work/wpitchoune/svnpub/prss/trunk
244 abs_top_builddir = /home/jporsini/work/wpitchoune/svnpub/prss/trunk
245 abs_top_srcdir = /home/jporsini/work/wpitchoune/svnpub/prss/trunk
247 am__include = include
250 am__tar = $${TAR-tar} chof - "$$tardir"
251 am__untar = $${TAR-tar} xf -
252 bindir = ${exec_prefix}/bin
253 build = x86_64-unknown-linux-gnu
257 build_vendor = unknown
259 datadir = ${datarootdir}
260 datarootdir = ${prefix}/share
261 docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
263 exec_prefix = ${prefix}
264 gsettingsschemadir = ${datarootdir}/glib-2.0/schemas
265 host = x86_64-unknown-linux-gnu
269 host_vendor = unknown
271 includedir = ${prefix}/include
272 infodir = ${datarootdir}/info
273 install_sh = ${SHELL} /home/jporsini/work/wpitchoune/svnpub/prss/trunk/install-sh
274 libdir = ${exec_prefix}/lib
275 libexecdir = ${exec_prefix}/libexec
276 localedir = ${datarootdir}/locale
277 localstatedir = ${prefix}/var
278 mandir = ${datarootdir}/man
279 mkdir_p = /bin/mkdir -p
280 oldincludedir = /usr/include
283 program_transform_name = s,x,x,
285 sbindir = ${exec_prefix}/sbin
286 sharedstatedir = ${prefix}/com
288 sysconfdir = ${prefix}/etc
294 icons/hicolor/scalable \
298 dist_doc_DATA = AUTHORS \
306 desktopdir = $(datadir)/applications
307 desktop_DATA = prss.desktop
308 EXTRA_DIST = $(desktop_DATA)
312 am--refresh: Makefile
314 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
316 case '$(am__configure_deps)' in \
318 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
319 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
324 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
325 $(am__cd) $(top_srcdir) && \
326 $(AUTOMAKE) --gnu Makefile
328 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
331 echo ' $(SHELL) ./config.status'; \
332 $(SHELL) ./config.status;; \
334 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
335 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
338 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
339 $(SHELL) ./config.status --recheck
341 $(top_srcdir)/configure: $(am__configure_deps)
342 $(am__cd) $(srcdir) && $(AUTOCONF)
343 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
344 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
345 $(am__aclocal_m4_deps):
346 install-desktopDATA: $(desktop_DATA)
348 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
349 if test -n "$$list"; then \
350 echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \
351 $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \
353 for p in $$list; do \
354 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
356 done | $(am__base_list) | \
357 while read files; do \
358 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \
359 $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \
362 uninstall-desktopDATA:
364 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
365 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
366 dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
367 install-dist_docDATA: $(dist_doc_DATA)
369 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
370 if test -n "$$list"; then \
371 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
372 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
374 for p in $$list; do \
375 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
377 done | $(am__base_list) | \
378 while read files; do \
379 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
380 $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
383 uninstall-dist_docDATA:
385 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
386 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
387 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
389 # This directory's subdirectories are mostly independent; you can cd
390 # into them and run `make' without going through this Makefile.
391 # To change the values of `make' variables: instead of editing Makefiles,
392 # (1) if the variable is set in `config.status', edit `config.status'
393 # (which will cause the Makefiles to be regenerated when you run `make');
394 # (2) otherwise, pass the desired values on the `make' command line.
395 $(RECURSIVE_TARGETS):
396 @fail= failcom='exit 1'; \
397 for f in x $$MAKEFLAGS; do \
400 *k*) failcom='fail=yes';; \
404 target=`echo $@ | sed s/-recursive//`; \
405 list='$(SUBDIRS)'; for subdir in $$list; do \
406 echo "Making $$target in $$subdir"; \
407 if test "$$subdir" = "."; then \
409 local_target="$$target-am"; \
411 local_target="$$target"; \
413 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
416 if test "$$dot_seen" = "no"; then \
417 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
420 $(RECURSIVE_CLEAN_TARGETS):
421 @fail= failcom='exit 1'; \
422 for f in x $$MAKEFLAGS; do \
425 *k*) failcom='fail=yes';; \
430 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
431 *) list='$(SUBDIRS)' ;; \
433 rev=''; for subdir in $$list; do \
434 if test "$$subdir" = "."; then :; else \
435 rev="$$subdir $$rev"; \
439 target=`echo $@ | sed s/-recursive//`; \
440 for subdir in $$rev; do \
441 echo "Making $$target in $$subdir"; \
442 if test "$$subdir" = "."; then \
443 local_target="$$target-am"; \
445 local_target="$$target"; \
447 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
449 done && test -z "$$fail"
451 list='$(SUBDIRS)'; for subdir in $$list; do \
452 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
455 list='$(SUBDIRS)'; for subdir in $$list; do \
456 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
459 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
460 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
461 unique=`for i in $$list; do \
462 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
464 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
465 END { if (nonempty) { for (i in files) print i; }; }'`; \
469 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
470 $(TAGS_FILES) $(LISP)
473 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
474 include_option=--etags-include; \
477 include_option=--include; \
480 list='$(SUBDIRS)'; for subdir in $$list; do \
481 if test "$$subdir" = .; then :; else \
482 test ! -f $$subdir/TAGS || \
483 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
486 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
487 unique=`for i in $$list; do \
488 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
490 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
491 END { if (nonempty) { for (i in files) print i; }; }'`; \
493 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
494 test -n "$$unique" || unique=$$empty_fix; \
495 if test $$# -gt 0; then \
496 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
499 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
504 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
505 $(TAGS_FILES) $(LISP)
506 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
507 unique=`for i in $$list; do \
508 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
510 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
511 END { if (nonempty) { for (i in files) print i; }; }'`; \
512 test -z "$(CTAGS_ARGS)$$unique" \
513 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
517 here=`$(am__cd) $(top_builddir) && pwd` \
518 && $(am__cd) $(top_srcdir) \
519 && gtags -i $(GTAGS_ARGS) "$$here"
522 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
524 distdir: $(DISTFILES)
525 $(am__remove_distdir)
526 test -d "$(distdir)" || mkdir "$(distdir)"
527 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
528 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
529 list='$(DISTFILES)'; \
530 dist_files=`for file in $$list; do echo $$file; done | \
531 sed -e "s|^$$srcdirstrip/||;t" \
532 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
533 case $$dist_files in \
534 */*) $(MKDIR_P) `echo "$$dist_files" | \
535 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
538 for file in $$dist_files; do \
539 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
540 if test -d $$d/$$file; then \
541 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
542 if test -d "$(distdir)/$$file"; then \
543 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
545 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
546 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
547 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
549 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
551 test -f "$(distdir)/$$file" \
552 || cp -p $$d/$$file "$(distdir)/$$file" \
556 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
557 if test "$$subdir" = .; then :; else \
559 || test -d "$(distdir)/$$subdir" \
560 || $(MKDIR_P) "$(distdir)/$$subdir" \
562 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
564 new_distdir=$$reldir; \
565 dir1=$$subdir; dir2="$(top_distdir)"; \
567 new_top_distdir=$$reldir; \
568 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
569 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
570 ($(am__cd) $$subdir && \
571 $(MAKE) $(AM_MAKEFLAGS) \
572 top_distdir="$$new_top_distdir" \
573 distdir="$$new_distdir" \
574 am__remove_distdir=: \
575 am__skip_length_check=: \
576 am__skip_mode_fix=: \
581 -test -n "$(am__skip_mode_fix)" \
582 || find "$(distdir)" -type d ! -perm -755 \
583 -exec chmod u+rwx,go+rx {} \; -o \
584 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
585 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
586 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
587 || chmod -R a+r "$(distdir)"
589 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
590 $(am__remove_distdir)
593 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
594 $(am__remove_distdir)
597 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
598 $(am__remove_distdir)
601 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
602 $(am__remove_distdir)
605 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
606 $(am__remove_distdir)
609 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
610 $(am__remove_distdir)
613 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
614 $(am__remove_distdir)
617 -rm -f $(distdir).zip
618 zip -rq $(distdir).zip $(distdir)
619 $(am__remove_distdir)
621 dist dist-all: distdir
622 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
623 $(am__remove_distdir)
625 # This target untars the dist file and tries a VPATH configuration. Then
626 # it guarantees that the distribution is self-contained by making another
629 case '$(DIST_ARCHIVES)' in \
631 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
633 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
635 lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
637 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
639 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
641 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
643 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
645 unzip $(distdir).zip ;;\
647 chmod -R a-w $(distdir); chmod u+w $(distdir)
648 mkdir $(distdir)/_build
649 mkdir $(distdir)/_inst
651 test -d $(distdir)/_build || exit 0; \
652 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
653 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
655 && $(am__cd) $(distdir)/_build \
656 && ../configure --srcdir=.. --prefix="$$dc_install_base" \
657 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
658 $(DISTCHECK_CONFIGURE_FLAGS) \
659 && $(MAKE) $(AM_MAKEFLAGS) \
660 && $(MAKE) $(AM_MAKEFLAGS) dvi \
661 && $(MAKE) $(AM_MAKEFLAGS) check \
662 && $(MAKE) $(AM_MAKEFLAGS) install \
663 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
664 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
665 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
667 && chmod -R a-w "$$dc_install_base" \
669 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
670 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
671 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
672 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
673 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
674 } || { rm -rf "$$dc_destdir"; exit 1; }) \
675 && rm -rf "$$dc_destdir" \
676 && $(MAKE) $(AM_MAKEFLAGS) dist \
677 && rm -rf $(DIST_ARCHIVES) \
678 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
681 $(am__remove_distdir)
682 @(echo "$(distdir) archives ready for distribution: "; \
683 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
684 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
686 @test -n '$(distuninstallcheck_dir)' || { \
687 echo 'ERROR: trying to run $@ with an empty' \
688 '$$(distuninstallcheck_dir)' >&2; \
691 $(am__cd) '$(distuninstallcheck_dir)' || { \
692 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
695 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
696 || { echo "ERROR: files left after uninstall:" ; \
697 if test -n "$(DESTDIR)"; then \
698 echo " (check DESTDIR support)"; \
700 $(distuninstallcheck_listfiles) ; \
702 distcleancheck: distclean
703 @if test '$(srcdir)' = . ; then \
704 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
707 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
708 || { echo "ERROR: files left in build directory after distclean:" ; \
709 $(distcleancheck_listfiles) ; \
712 check: check-recursive
713 all-am: Makefile $(DATA)
714 installdirs: installdirs-recursive
716 for dir in "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(docdir)"; do \
717 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
719 install: install-recursive
720 install-exec: install-exec-recursive
721 install-data: install-data-recursive
722 uninstall: uninstall-recursive
725 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
727 installcheck: installcheck-recursive
729 if test -z '$(STRIP)'; then \
730 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
731 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
734 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
735 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
736 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
743 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
744 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
746 maintainer-clean-generic:
747 @echo "This command is intended for maintainers to use"
748 @echo "it deletes files that may require special tools to rebuild."
749 clean: clean-recursive
751 clean-am: clean-generic mostlyclean-am
753 distclean: distclean-recursive
754 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
756 distclean-am: clean-am distclean-generic distclean-tags
770 install-data-am: install-desktopDATA install-dist_docDATA
772 install-dvi: install-dvi-recursive
778 install-html: install-html-recursive
782 install-info: install-info-recursive
788 install-pdf: install-pdf-recursive
792 install-ps: install-ps-recursive
798 maintainer-clean: maintainer-clean-recursive
799 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
800 -rm -rf $(top_srcdir)/autom4te.cache
802 maintainer-clean-am: distclean-am maintainer-clean-generic
804 mostlyclean: mostlyclean-recursive
806 mostlyclean-am: mostlyclean-generic
816 uninstall-am: uninstall-desktopDATA uninstall-dist_docDATA
818 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
819 install-am install-strip tags-recursive
821 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
822 all all-am am--refresh check check-am clean clean-generic \
823 ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
824 dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
825 distcheck distclean distclean-generic distclean-tags \
826 distcleancheck distdir distuninstallcheck dvi dvi-am html \
827 html-am info info-am install install-am install-data \
828 install-data-am install-desktopDATA install-dist_docDATA \
829 install-dvi install-dvi-am install-exec install-exec-am \
830 install-html install-html-am install-info install-info-am \
831 install-man install-pdf install-pdf-am install-ps \
832 install-ps-am install-strip installcheck installcheck-am \
833 installdirs installdirs-am maintainer-clean \
834 maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
835 pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
836 uninstall-desktopDATA uninstall-dist_docDATA
840 asciidoc -n -a toc README
843 asciidoc -n -a toc NEWS
845 # Tell versions [3.59,3.63) of GNU make to not export all variables.
846 # Otherwise a system limit (for SysV at least) may be exceeded.